|
|
| 第40行： |
第40行： |
|
| |
|
| '''<IS_TS id=PH_IS5_RP/>''' | | '''<IS_TS id=PH_IS5_RP/>''' |
| * In the general data and in the data table of the element ''<IS_TS id=strefaPaneliSufitowych/>'' the possibility of declaration of automatic placement of adjacent rows of panels in the zone with mutual offset has been introduced. | | * 在一般参数和''<IS_TS id=strefaPaneliSufitowych/>'' 的参数表中，增加了对辐射板铺设区域自动铺设辐射板的多个控制变量。 |
|
| |
|
| '''<IS_TS id=PH_IS5_T/>''' | | '''<IS_TS id=PH_IS5_T/>''' |
| * For sanitary appliances, it is possible to declare the frame. | | * 对于卫浴装置，可声明其支架。 |
| * A declaration of default manifold types has been introduced in the general data. | | * 在一般参数中增加了对省缺分水器类型的声明。 |
| | |
| ===RELEASE Rev. 16.2===
| |
| * There were no significant functional changes in this release.
| |
| ====Articles in HelpSystem:====
| |
| * [[Designing of water supply system installation]]
| |
| * [[Heating/cooling zone build-up editor]] (actualized)
| |
| * [[How to eliminate: "Cannot apply any pipe spacing"]]
| |
| | |
| ===RELEASE Rev. 16.1===
| |
| * There were no significant functional changes in this release.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[General recommendations for users of InstalSystem 4 starting work with InstalSystem 5]]
| |
| | |
| ===RELEASE Rev. 16.0===
| |
| '''<IS_TS id=PH_ISNS5_BASE/>'''
| |
| * Many elements of the installation (radiator, valve, pump, etc.) by default are inserted with label.
| |
| * Possibility of precise control of pipe-runs arrangement, with different ordinates of the beginning and end of the pipe-run (case of pipe-runs carried out in inclined ceilings / walls).
| |
| | |
| '''<IS_TS id=PH_IS5_H/>'''
| |
| * Possibility to declare (''<IS_TS id=rsDanogi/>'' window, ''<IS_TS id=StoreyManagement/>'' tab) the default distance from the floor separately of the supply and return pipe-runs.
| |
| | |
| '''<IS_TS id=PH_IS5_T/>'''
| |
| * Possibility to declare (''<IS_TS id=rsDanogi/>'' window, ''<IS_TS id=StoreyManagement/>'' tab) the default distance from the floor separately of the hot water, cold water and circulation pipe-runs.
| |
| * Rearrangement of general data tabs.
| |
| * New element of the installation - linear drain.
| |
| | |
| '''<IS_TS id=PH_IS5_SM/>'''
| |
| * New module enabling the design of heating and water supply installations with the use of flat stations.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Calculation of design heat load of rooms]] (actualized)
| |
| * [[Manifold and accessories]] (actualized)
| |
| * [[Pipe feeds route and editing pipe feeds in a radiant system]] (actualized)
| |
| * [[Pipe feeds route - Good practices and use cases]] (actualized)
| |
| | |
| ===RELEASE Rev. 15.3===
| |
| * There were no significant functional changes in this release.
| |
| | |
| ===RELEASE Rev. 15.2===
| |
| * There were no significant functional changes in this release.
| |
| | |
| ===RELEASE Rev. 15.1===
| |
| '''<IS_TS id=PH_ISNS5_BASE/>'''
| |
| * List of elements displayed in window ''<IS_TS id=ProjectBrowser/>'' ia automatically adapted to currently edited edit scope.
| |
| * ''<IS_TS id=strDlgKatalogiObslugaKatalogowHint/>'' window - tabs have been replaced by more precise catalogue filters
| |
| * Window ''<IS_TS id=View3D/>'' - possibility to display edges of the elements (available under the button ''<IS_TS id=btShowEdges/>''/''<IS_TS id=btHideEdges/>'' in section ''<IS_TS id=rsView/>'')
| |
| * The ability to generate rooms, whose whole area is located in another room
| |
| '''<IS_TS id=PH_IS5_H/>'''/ '''<IS_TS id=PH_IS5_C/>'''
| |
| * Settings from tab ''<IS_TS id=DomyslneZaworyIArmatura/>'' have been moved to tabs: ''<IS_TS id=InstalacjaRozprowadzajaca/>''-''<IS_TS id=DaneInstalacjiRozprowadzajacejCzynnikGrzewczyChlodniczy/>'' and ''<IS_TS id=iNameCOGrzejnikPlural/>''-''<IS_TS id=GrzejnikiTypyIDane/>'' (tab ''<IS_TS id=DomyslneZaworyIArmatura/>'' has been removed).
| |
| '''<IS_TS id=PH_IS5_HL/>'''
| |
| * Enabling module ''<IS_TS id=ObliczeniaCieplneBudynku/>'' automatically switches common project setting: ''<IS_TS id=strs_enumidISFOZCDaneOgolneStrataCieplaCalcKindForNewPom/>'' into variant ''<IS_TS id=rsOZCPomieszczenieStrataCieplaCalcKindWgWskaznika/>''
| |
| * Enabled correction of room internal temperature (''<IS_TS id=strTempPomOgrzewanieSymbol/>'') of standard room types.
| |
| '''<IS_TS id=PH_IS5_RL/>'''
| |
| * Manifold can be placed on a drawing in horizontal position or with upward outlet ports (configuration via new field in data table ''<IS_TS id=strpnOrientation/>'').
| |
| * In the tab ''<IS_TS id=sOpcjeObliczen/>'' in ''<IS_TS id=rsDanogi/>'' window ''<IS_TS id=SpecyficzneOpcjeRynkoweOP/>'' has been added - possibility to choose the method of the calculation without a surplus to flow rate for compensation of heat flow to the other side of the ''<IS_TS id=strPGCh/>''
| |
| '''<IS_TS id=PH_IS5_RP/>'''
| |
| * <IS_TS id=DataEditorTable/> window of element <IS_TS id=PanelScienny/>/<IS_TS id=iNameCOPanelSufitowy/> - <IS_TS id=stringdpmax/> field has been added thus enabling control of maximum pressure drop in single panel or set of panels in serial connection.
| |
| '''<IS_TS id=PH_IS5_T/>'''
| |
| * Water supply installations designing module - availability depending on package
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Installation with cooling radiant and panel systems in multifunctional building]]
| |
| * [[Preparation of building structure - Multi-storey rooms]]
| |
| * [[Software configuration - Project table]]
| |
| | |
| ===RELEASE Rev. 14.2===
| |
| * The amount and content of neutral product databases available in different language versions has been unified, what will facilitate the transfer of projects between versions.
| |
| ===RELEASE Rev. 14.1===
| |
| * There were no significant functional changes in this release.
| |
| ====Articles in HelpSystem:====
| |
| * [[Installation with underfloor and wall radiant heating system in single family building]] (actualized)
| |
| | |
| ===RELEASE Rev. 14.0===
| |
| ====Modules:====
| |
| '''<IS_TS id=PH_ISNS5_BASE/>'''
| |
| * A new access to PDF creation of text printouts. If the appropriate driver is installed in the system, the program uses it and provides the ''<IS_TS id=PDFPrint/>'' button directly in the print module's toolbar.
| |
| * Possibility to declare the angle (rotation) of fittings (valve, filter etc.) relative to the pipeline axis (Window: ''<IS_TS id=DataEditorTable/>'', field: ''<IS_TS id=KatObrotu/>'').
| |
| * New (separate) style and label for the ''<IS_TS id=ObrysBud/>'' element.
| |
| * New field ''<IS_TS id=OdlegloscOdPodlogiCaption/>'' in the data table of the element ''<IS_TS id=iNameDzialka/>''. Facilitates the control of the elevation of the network and allows correct copying of the repetitive installation to other floors.
| |
| * Attractive graphic styles of certain elements in ''<IS_TS id=View3D/>'', including elements of the building structure.
| |
| '''<IS_TS id=PH_IS5_RL/>'''
| |
| * ''<IS_TS id=strOptimizationChart/>'' presenting the quality of supply temperature (''<IS_TS id=TemperaturaZasilaniaOPSymbol/>'') in consideration of heating requirements of zones. Available in window ''<IS_TS id=rsDanogi/>'' on the tab: ''<IS_TS id=iNameCOZrodloPlural/>'', after first calculations.
| |
| * New templates for ''<IS_TS id=iNameTabelkaRozdzielacza/>''
| |
| * New field ''<IS_TS id=strPlytaSyst/>'' in window ''<IS_TS id=rsDanogi/>'' on the tab: ''<IS_TS id=DaneInstalacjiPodlogowych/>'' allows declaration of default system plate.
| |
| '''<IS_TS id=PH_IS5_HL/>'''
| |
| * Improvement of the algorithm recognizing the area of the wall above the windows in a wall adjacent to ground, located entirely below the ground.
| |
| ====Articles in HelpSystem:====
| |
| * [[Introduction to the work with the package InstalSystem 5]] (actualized)
| |
| | |
| ===RELEASE Rev. 13.3===
| |
| ====Modules:====
| |
| '''<IS_TS id=PH_ISNS5_BASE/>'''
| |
| * Improvements of algorithm responsible for shaping the roof slopes
| |
| ===RELEASE Rev. 13.2===
| |
| * There were no significant functional changes in this release.
| |
| ===RELEASE Rev. 13.1===
| |
| ====Modules:====
| |
| '''<IS_TS id=PH_ISNS5_BASE/>'''
| |
| * Rearrangement of icons in ''<IS_TS id=lystrFloors/>''
| |
| '''<IS_TS id=PH_IS5_RL/>'''
| |
| * Reconstruction and improvements of ''<IS_TS id=ShowInteractiveCalculationWindow/>''
| |
| | |
| ===RELEASE Rev. 13.0===
| |
| ====Modules:====
| |
| '''<IS_TS id=PH_ISNS5_BASE/>'''
| |
| * Headers of result tables can be locked and visible while scrolling tables.
| |
| '''<IS_TS id=PH_IS5_HL/>'''
| |
| * Possibility to assign thermal partition definition (with defined U value) to construction partition of the same type, irrespective to its thickness.
| |
| '''<IS_TS id=PH_IS5_RL/>'''
| |
| * Pipe-feeds for underfloor heating/cooling system can be laid in insulation layer (below heating/cooling pipes in the screed)
| |
| * Possibility to change orientation (vertically or horizontally) of the ''<IS_TS id=iNameCOReduktorTemp/>''.
| |
| * New label for element ''<IS_TS id=iNameCOReduktorTemp/>''.
| |
| * <IS_TS id=iNameTabelkaMieszacza/>
| |
| * Improvements of algorithm which determines supply temperature for radiant systems.
| |
| * Improvements of algorithm which divides element ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' into ''<IS_TS id=strPGCh/>''.
| |
| * Diagnostics of laminar flow.
| |
| '''<IS_TS id=PH_IS5_H/>''' and '''<IS_TS id=PH_IS5_C/>'''
| |
| * More connection variants for element ''<IS_TS id=iNameCOElementONarzOporze/>''.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Problems with the application on computers with integrated graphics card]]
| |
| | |
| ===RELEASE Rev. 12.2===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' ''<IS_TS id=PH_5_PM/>'''''
| |
| * Improvement of Autosave function
| |
| '''''<IS_TS id=PH_5_C/>'''''
| |
| * Implemented cooling system module - availability depending on package
| |
| | |
| ===RELEASE Rev. 12.1===
| |
| * There were no significant functional changes in this release.
| |
| | |
| ===RELEASE Rev. 12.0===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Improvement of ''<IS_TS id=strAUTOModeName/>'' mode.
| |
| * Diagnostics of available graphics cards.
| |
| | |
| '''''<IS_TS id=PH_IS5_DOG/>'''''
| |
| * Display of radiator output for manually selected sizes through the ''<IS_TS id=DataEditorTable/>''.
| |
| | |
| '''''<IS_TS id=PH_5_RP/>'''''
| |
| * Improvement of readability of ''<IS_TS id=iNameTabelkaRozdzielacza/>''.
| |
| * Improvement of algorithm determining drop of temperature on the set of serially connected panels.
| |
| | |
| ===RELEASE Rev. 11.0===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>''''
| |
| * Improved function ''<IS_TS id=PartitionsGenerator/>''.
| |
| * Improved zoom scale and the preview scale.
| |
| * Improved diagnostics concerning errors in the building structure.
| |
| * Supplemented information presented in the result tables.
| |
| * Integration of ''<IS_TS id=PaperFormat/>'' element with ''<IS_TS id=PrintoutPages_ElementName/>'' element.
| |
| | |
| '''''<IS_TS id=PH_IS5_RL/>'''''
| |
| * Improved algorithm of heat output calculations of ''Heated by pipe feeds'' floor type connected virtually.
| |
| * Improved algorithm which automatically inserts a heating/cooling floors into rooms with a hole in the slab.
| |
| | |
| '''''<IS_TS id=PH_IS5_H/>'''''
| |
| * Improved automatic connections of integrated radiators to distrubution pipes, depending on the configuration: valve shape (straight, angle) and connection direction (from the floor, from the wall).
| |
| | |
| '''<IS_TS id=PH_IS5_RP/>'''
| |
| * Improved flow rates calculations for the serial-connected panels.
| |
| | |
| ===RELEASE Rev. 9.2===
| |
| * There were no significant functional changes in this release.
| |
| | |
| ===RELEASE Rev. 9.1===
| |
| * There were no significant functional changes in this release.
| |
| | |
| ===RELEASE Rev. 9.0===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Added declare multi-wing doors and windows.
| |
| * Added the appearance configuration of the ''<IS_TS id=iNameReferencePoint/>''.
| |
| * ''AUTO'' mode has been extended of snap the vertices ''<IS_TS id=rpOtworWstropie/>'' to elements from the DWG underlay.
| |
| | |
| '''''<IS_TS id=PH_5_RL/>'''''
| |
| * Improved algorithm of insert ''Heating floor'' in multi-storey rooms (with ''Opening in slab'').
| |
| * Implemented automatic algorithm which cuts ''Heating wall'' lying in the area of windows / doors.
| |
| | |
| '''''<IS_TS id=PH_5_HL/>'''''
| |
| * Added the possibility of defining ''Tolerance relative to thickness of graphical partition'' (wall, ceilings and roofs), that the ''Partition definitions'' will be assign.
| |
| | |
| '''''<IS_TS id=PH_5_RP/>'''''
| |
| * Improved determination of the optimal refrigerating level (Δθ) for the serial-connected panels.
| |
| * Maximum height position for the panels has been increased to 30 m.
| |
| * Expanded information of the flow rate for panel hint and panel label.
| |
| | |
| ===RELEASE Rev. 8.0===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Improved diagnostics for incomplete data when ''Generate walls and slabs from rooms and building contour'' algorithm has launched.
| |
| * Room label - added the ability of display the ''<IS_TS id=sOpis/>'' field.
| |
| * Added the possibilty of creating default room types (with their data and parameters).
| |
| * Added configure the appearance of elements during their insertion operations.
| |
| * Improved the ergonomy of filling graphic elements data.
| |
| | |
| '''''<IS_TS id=PH_5_HL/>'''''
| |
| * Changed diagnostics from error to warning for ''Partition definitions'' with no thickness filled for ''Part. with specified U (Heat transfer coefficient)''.
| |
| | |
| ===RELEASE Rev. 7.3===
| |
| * There were no significant functional changes in this release.
| |
| | |
| ===RELEASE Rev. 7.2===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * New diagnostic messages for incorrect or incomplete building structure data have been introduced.
| |
| * The rank of the message with zero thickness of the partition definition has been reduced to a warning or hint (when the definition has no default status).
| |
| | |
| '''''<IS_TS id=PH_5_RP/>'''''
| |
| * "Zone of ceiling panels" tool has been improved and developed.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[How to eliminate: "Unbalanced circuit of terminal unit "XY"..."]]
| |
| | |
| ===RELEASE Rev. 6.1===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Added A0 and A1 formats to printout pages.
| |
| * Improved AUTO and ORTO modes.
| |
| | |
| '''''<IS_TS id=PH_IS5_DOG/>'''''
| |
| * Added possibility to display in radiator’s label setting of valves insert.
| |
| * Allowed defining in project options default distance of radiator from wall.
| |
| * Improved graphical presentation of radiators mounting items (so-called consoles) on plan views.
| |
| | |
| '''''<IS_TS id=PH_5_RL/>'''''
| |
| * Added possibility to choose criterion of supply temperature optimization in radiant systems with correction of the algorithm's operation.
| |
| * Improved algorithm of automatic division Heating/Cooling Zones into Heating/Cooling Areas.
| |
| * Improved algorithm of automatic drawings of radiant heating/cooling loops.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[How to include the drawing loop lenght in the calculations?]]
| |
| * [[Preparation of building structure]] (actualized)
| |
| * [[Appending drawings with radiant system loops]] (actualized)
| |
| * [[Inserting plates in dry floor heating system]]
| |
| | |
| ===RELEASE Rev. 5.1===
| |
| * There were no significant functional changes in this release.
| |
| | |
| ===RELEASE Rev. 5.0===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Added dimension lines.
| |
| | |
| '''''<IS_TS id=PH_5_RL/>'''''
| |
| * Improved the algorithm of automatic division of heating/cooling floor zone.
| |
| * Improved presentation of RHC loop drawing on 3D view.
| |
| * Extended functionality of pipe feed route to automatically fill the entire width of the stip with pipe feeds.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Automatically connect terminal units]]
| |
| * [[Editing pipe feeds in a radiant system - Good practices and use cases]]
| |
| * [[Software configuration]] (actualized)
| |
| * [[Radiant heating systems - how to improve thermal and hydraulic results]]
| |
| * [[Design of radiant heating floor and wall installation]] (actualized)
| |
| * [[Design based on a project file from InstalSystem 4]]
| |
| * [[Designing radiant (ceiling, wall) panel heating/cooling systems]] (actualized)
| |
| * [[Designing radiant heating systems with pipe-runs as distribution system]] (actualized)
| |
| | |
| ===RELEASE Rev. 4.0===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_5_RL/>'''''
| |
| * Improved the algorithm drawing the RHC loop.
| |
| | |
| '''''<IS_TS id=PH_5_RP/>'''''
| |
| * Added ceiling panels zone - tool for automatic stacking of ceiling panels.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Import of building model from BIM compatible formats]]
| |
| * [[Import underlay files]] (actualized)
| |
| * [[Radiant steel ceiling panels]] (actualized)
| |
| * [[Preparation of building structure - Creation of roofs with different construction]]
| |
| * [[Preparation of building structure]] (actualized)
| |
| | |
| ===RELEASE Rev. 2.2===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Added possibility to saved files read-only.
| |
| * 3D view printout has been avaliable.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Calculation of design heat load of rooms]]
| |
| * [[Designing radiant (ceiling, wall) panel heating/cooling systems]] (actualized)
| |
| * [[How to eliminate: "Automatic division of H/C Zone not possible"]]
| |
| * [[Presentation of the calculations result]]
| |
| | |
| ===RELEASE Rev. 2.1===
| |
| * There were no significant functional changes in this release..
| |
| | |
| ===RELEASE Rev. 2.0===
| |
| ====Initial scope of modules:====
| |
| * '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * '''''<IS_TS id=PH_5_HL/>'''''
| |
| * '''''<IS_TS id=PH_IS5_DOG/>'''''
| |
| * '''''<IS_TS id=PH_5_RL/>'''''
| |
| * '''''<IS_TS id=PH_5_RP/>'''''
| |
| * '''''<IS_TS id=PH_5_RLD/>'''''
| |
| * '''''<IS_TS id=PH_5_H/>'''''
| |
| * '''''<IS_TS id=PH_5_C/>'''''
| |
| * '''Interface gbXML (BIM)'''
| |
| | |
| ====Initial state of information materials====
| |
| * [[InstalSystem 5]]
| |
| <!--* TUTAJ DODAĆ LINK DO STRONY WWW Z PRODUKTAMI INSTALSYSTEM 5-->
| |
| | |
| <!--===Version BETA Rev. 2.0.B5===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>''''
| |
| * Introduced term licences as additional licensing option (available for selected packages) with mechanisms supporting term and renewal control (''Change license'' tab),
| |
| * Introduced demo version (available for selected packages).
| |
| * Added the ability to define window layouts.
| |
| * The ''AUTO'' mode has been enhanced when inserting the ''Reference point''.
| |
| * Organized tab ''Sources'' in the ''General data'' in order to improve the ergonomics and intuitive editing data.
| |
| * The field ''Floor'' in the ''Storeys management'' obtained an additional ''AUTO'' status (the value is based on the typical floor heating thickness).
| |
| * Added the ability to quickly locate and select the active elements windows for which diagnostic message shows.
| |
| * Added the ability to enter text desctiprions and notes in the ''2D editor'' (icons: ''Text'' and ''Note'' in the group ''Labels and graphics'').
| |
| | |
| ===Version BETA Rev. 2.0.B4===
| |
| ====Modules:====
| |
| '''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''
| |
| * Put in order access to the most important diagnostic messages.
| |
| * Diagnostics has been added to report errors during roof generating.
| |
| * Added button which allows quick access to component style from the data table.
| |
| * Improved ''Automatically connect terminal units'' function for quick removal of redundant pipe-runs.
| |
| * Changed default unit (from ''m'' to ''mm'') for the storeys data field ''Floor''.
| |
| * Predefined result project file names have been introduced.
| |
| * Changed the name of the ''Upgrade'' button in Manager for ''Licence change'' button while preserving its original functionality.
| |
| | |
| '''''<IS_TS id=PH_5_HL/>'''''
| |
| * The format ''Heat losses data'' moved from the ''H&E'' window to the ''General Data'' window.
| |
| | |
| '''''<IS_TS id=PH_5_RL/>'''''
| |
| * Added the ability to define the default type of 3D valve in the mixer.
| |
| * The default mixer size has been corrected.
| |
| | |
| ===Version BETA Rev. 2.0.B3===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Edit tabs in graphical editor got two new states of visibility:
| |
| ** ''Translucent when active'' - useful when analyzing the partition definitions and graphics partitions in 3D.
| |
| ** ''The only one visible when inactive'' - automatically inactivates other ranges, regardless of their own settings.
| |
| | |
| '''''<IS_TS id=PH_5_HL/>'''''
| |
| * Multi-storey rooms are recognized (equivalent to ''interconnected rooms'' in version 4). A multi-storey room is automatically created in the absence of a slab between rooms on adjacent floors when the slab does not cover the whole projection of the room or when the slab has an active opening in slab.
| |
| * It is possible to select partition definitions as ''default for this type and dimensions'' also in the project browser tree, using the pop-up menu.
| |
| * It is possible to specify the thickness for the partition definitions without layers (Partition with specified "U") so that they can also be assigned automatically.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Appending drawings with radiant system loops]] (actualized)
| |
| * [[Technical specifications of InstalSystem 5 package]] (actualized)
| |
| | |
| ===Version BETA Rev. 2.0.B2===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Fixed walls connecting generated automatically by the partitions generator.
| |
| * Fixed connecting fragments of the underlay in .pdf format.
| |
| * Standardized the list of kinds and types of rooms.
| |
| * Allowed quickly switching between worksheets in a graphical editor using the arrows next to the selection window of the worksheets.
| |
| | |
| '''''<IS_TS id=PH_5_RL/>'''''
| |
| * Moved window of control circuit settings to Thermal systems sources in the General Data.
| |
| * Allowed to replace virtual temperature sources with graphic elements by ugins a special button in the control circuit settings in the General Data.
| |
| | |
| ===Version BETA Rev. 2.0.B1===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Introduced the ability to search elements in the Project browser based on a string of signs.
| |
| * Allowed to insert dormers.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Designing heating systems with convective radiators]]
| |
| * [[Designing of radiant heating installation on the basis of data from the Smart application]]
| |
| * [[Heating/cooling zone]]
| |
| * [[Using catalogs and catalogs data in the project]]
| |
| | |
| ===Version BETA 37 Rev. 0.0.B37===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Improved efficiency of the program in handling with complex projects, time of files upload and regeneration of the 3D view.
| |
| | |
| '''''<IS_TS id=PH_5_DOG/>'''''
| |
| * Added the ability to search of radiators and valves placed on the radiators in the search window of elements in the project.
| |
| | |
| '''''<IS_TS id=PH_5_HL/>'''''
| |
| * Introduced heat loss (thermal load) module in accordance with standard EN 12831.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Preparation of building structure]] (actualized)
| |
| * [[Smart application - Quick selection of system components]] (actualized)
| |
| | |
| ===Version BETA 35 Rev. 0.0.B35===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Raising the ergonomics of editing the roof by multiedit few vertices at the same time.
| |
| * Merge and trim functions identify the premises in one operation.
| |
| * Introduced new physical elements - arched Windows and doors.
| |
| * Introduced new physical element - Opening in slab.
| |
| * Improved support for facilities construction if the hole in the roof.
| |
| * Introduced new feature - Building contour.
| |
| * Introduced the interpretation of walls based on stroke building.
| |
| * Introduced a new feature - Partitions generator.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Editing pipe feeds in a radiant system]] (actualized)
| |
| * [[General data]]
| |
| * [[Import files]] (actualized)
| |
| * [[Manifold and accessories]] (actualized)
| |
| * [[Preparation of building structure]]
| |
| | |
| ===Version BETA 34 Rev. 0.0.B34===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Improved import files created in InstalSystem 4 for automatic deletion of elements that are not supported in InstalSystem 5.
| |
| * Improved ''Wall'' connection.
| |
| * Integrated a full range of Construction processing operations.
| |
| | |
| '''''<IS_TS id=PH_5_DOG/>'''''
| |
| * Expanded radiator sizing in ''Addition for thermostat'' and ''Addition for casing/chanel''.
| |
| * Expanded operations on the elements ''Radiators'' about the possibility of ''Flip horizontal''.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Design of radiant heating/radiant cooling installation]]
| |
| * [[Designing radiant (ceiling, wall) panel heating/cooling systems]]
| |
| * [[Designing radiant heating systems with pipe-runs as distribution system]]
| |
| * [[Radiant steel ceiling panels]]
| |
| | |
| ===Version BETA 33 Rev. 0.0.B33===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_5_RL/>'''''
| |
| * Improved the data propagation from ''Room'' elements created with walls to the ''Heating/Cooling Wall Zone'' elements.
| |
| '''''<IS_TS id=PH_5_DOG/>'''''
| |
| * Improved the data propagation from ''Room'' elements created with walls to the ''Radiator'' elements.
| |
| | |
| ===Version BETA 32 Rev. 0.0.B32===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Introduced the ability of creating rooms due to other building structure's elements inserted in the project.
| |
| * Introduced the ability of dividing roof into parts and added new functionality which allows to change ordinates of individual points at the roof's outline to model its real surface.
| |
| * Introduced new physical element - roof window.
| |
| * Introduced new physical element - recess.
| |
| * Improved evaluating the location of the elements above the plane of the floor.
| |
| * Increased the ergonomy of label editor.
| |
| | |
| '''''<IS_TS id=PH_5_DOG/>'''''
| |
| * Introduced radiator sizing in basic scope. This functionality will be completed and developed in the next beta versions.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Design of radiant heating floor and wall installation]]
| |
| | |
| ===Version BETA 31 Rev. 0.0.B31===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Introduced a new conception for wall element and the functionality of connecting walls.
| |
| * Indroduced new physical element - the slab.
| |
| * Indroduced new physical element - the roof.
| |
| * Expanded function "Shadow of a storey" for possibility to declare shadows displayed for all stories below.
| |
| | |
| '''''<IS_TS id=PH_5_RP/>'''''
| |
| * Introduced possibility of calculating thermal output of ceiling/wall panels according to EN 1264 standard.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Release notes InstalSystem Smart5]]
| |
| | |
| ===Version BETA 30 Rev. 0.0.B30===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Allowed to control the content of diagnostic messages using the checkbox "Messages for selected components" on the list of filters in the diagnostics window.
| |
| * Introduced the possibility to handle by the distribution system mail domains with the sign "-".
| |
| | |
| '''''<IS_TS id=PH_5_RP/>'''''
| |
| * Taken into account results for panels in the radiant heating general results.
| |
| * Introduced the presentation of panels connection points on 3D view.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Editing pipe feeds in a radiant system]] (atualizado)
| |
| * [[How to eliminate problems with the diagnostic message: "Automatic arrangement of pipe feeds not possible - change pipe feeds route or H/C Zone parameters or arrange pipe feeds manually"]]
| |
| * [[Smart application - Quick selection of system components]]
| |
| | |
| ===Version BETA 29 Rev. 16.5.1===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Allowed handling of mail domains containing sign "-" by the licence distribution system.
| |
| * Improved stability of the program during pasting complex installations.
| |
| * Introduced the ability to display the storeys shadow above and below on 2D view.
| |
| * For each element with snapping possibility added the ability to set in the AUTO mode a parameter which predetermine distance from the edge of another inserted element.
| |
| | |
| '''''<IS_TS id=PH_5_RL/>'''''
| |
| * Corrected a bug related to the manual connecting RHC loop directly to the manifold (without pipe-runs).
| |
| | |
| '''''<IS_TS id=PH_5_RP/>'''''
| |
| * Allowed the presentation of data in the printout of 'Manifold table' for panel systems installation.
| |
| | |
| '''''<IS_TS id=PH_5_RLD/>'''''
| |
| * Introduced dry system to the neutral catalogue of radiant heating systems.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Installation, activation and update InstalSystem 5 package]]
| |
| * [[Manifold and accessories]]
| |
| * [[Project and application management]]
| |
| | |
| ===Version BETA 28 Rev. 16.4.1===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Improved the automatic snapping of pipe-runs for the ORTO mode.
| |
| * Improved the function of rooms interpretation for files imported from '''[[InstalSystem 4]]''' package.
| |
| * Introduced the ability to insert into the project construction elements: ''Wall'', ''Window'', ''Door'', ''Opening in wall''.
| |
| | |
| '''''<IS_TS id=PH_5_RP/>'''''
| |
| * Introduced the possibility to insert into the project element ''Ceiling false panel'' (panel with no connection).
| |
| * Added the cooling result card for panel installation: ''General results cooling''.
| |
| * Included elements: ''Wall panel'' and ''Ceiling panel'' in results card: ''General results heating''.
| |
| | |
| ===Version BETA 27 Rev. 16.3.1===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Improved function 'automatically connect terminal units'.
| |
| * Made available the ability to configure the buttons to select a group of elements (SHIFT and CTRL).
| |
| * Introduced possibility of selecting 'None' in the climatic data in case of lack of apropriate climatic data catalogue in the program.
| |
| * Added the function of the graphic presentation of the route of flow from a given receiver to the source.
| |
| * Added the function of the graphic presentation of routes flow from the source (manifold, source) to all receivers, which it supplies.
| |
| | |
| '''''<IS_TS id=PH_5_RP/>'''''
| |
| * Introduced handling underfloor panels which lead the pipes in dry systems of radiant heating.
| |
| | |
| ===Version BETA 26 Rev. 16.2.1===
| |
| ====Modules:====
| |
| '''',<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Improved saving files in a network location.
| |
| * Introduced the possibility to choose the source for which you want to appear the critical circuit.
| |
| | |
| ===Version BETA 25 Rev. 16.1.1===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Added function that allows automatically connect terminal units.
| |
| * Added possibility of quick creating rectangular room with sides parallel to the X, Y by drawing diagonal of the room.
| |
| * The problem with sending Problem Report Form is eliminated.
| |
| | |
| '''''<IS_TS id=PH_5_RP/>'''''
| |
| * Added function that allows connect panels in series.
| |
| * Introduced the possibility to design heating/cooling installations using ceiling/wall panels (including radiant steel ceiling panels).<br/>''Attention! Required upgrade to the configuration with the new module (InstalSystem Manager - tab "Upgrade").
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Connecting storeys with the "Stack" element]]
| |
| * [[View navigation in the graphical editor]]
| |
| * [[Combine base files]]
| |
| | |
| ===Version BETA 24 Rev. 15.12.1===
| |
| | |
| ''Warning! For this version of the program the reinstallation is necessary.''
| |
| | |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Improved stability and quality of the program.
| |
| | |
| '''''<IS_TS id=PH_5_RL/>'''''
| |
| * Added a message about the lack of possibility for editing automatically generated pipe feeds/RHC loops.
| |
| * Standarized the content of data table for heating/cooling zones at various ranges of editing.
| |
| * Introduced permanent visibility of the field ''Pipe laying pattern'' in the data table for heating/cooling zones.
| |
| * Fixed an error that occurs while connecting pipe feeds route to the heating/cooling zone.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Export / print results and drawings]]
| |
| * [[Software configuration]] (actualized)
| |
| | |
| ===Version BETA 23 Rev. 15.11.1===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Fixed the problem with sending the Problem report form.
| |
| * Added icons for the .isproj files displayed in the InstalSystem Manager and in the Windows Explorer's window.
| |
| * The scope of the displayed catalogues in the general data has been adapted to the available project scope for the package.
| |
| | |
| '''''<IS_TS id=PH_5_RL/>'''''
| |
| * Changed the designation of nodes in the grid which supports the manual drawing of the loop.
| |
| * Added message box indicating the inability to remove the RHC loop.
| |
| | |
| '''''<IS_TS id=PH_5_H/>'''''
| |
| * Fixed the automatic sizing of manifolds' cabinets.
| |
| * Improved the propagation of the default data for manifold cabinet.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Editing pipe feeds in a radiant system]]
| |
| * [[How to make the program run faster]]
| |
| * [[Installation with ceiling heating and cooling system in commercial building]]
| |
| * [[Search components in the project]]
| |
| | |
| ===Version BETA 22 Rev. 15.10.1===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Added graphical rulers (horizontal and vertical) to help verify the scale of loaded underlay.
| |
| * Improved ORTO and AUTO modes.
| |
| * Fixed the problem with sending error report form after crash of the program.
| |
| * Improved overall stability and quality of the program by eliminating the reported errors.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Import files]]
| |
| * [[Appending drawings with radiant system loops]]
| |
| | |
| ===Version BETA 21 Rev. 15.9.2===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Modified the way of importing base drawing files.
| |
| * Added a ''Select components in rectangle'' function under the left mouse button.
| |
| * Improved acting of ''ORTO'' mode when moving objects.
| |
| * Accelerated loading of the newly created or saved again files, as a consequence the files created on previous versions may load slower.
| |
| | |
| '''''<IS_TS id=PH_5_RL/>'''''
| |
| * Added the possibility of parallel connection of several RHC loop to one common outlet from the manifold.
| |
| * Introduced balance diagnostics of the RHC loop connected to the manifold with not integrated balancing valves, and the possibility of adding on the pipe-runs valves which are balancing these objects.
| |
| | |
| '''''<IS_TS id=PH_5_H/>'''''
| |
| * Added the possibility to use multi-circuit heating floor zone.
| |
| * Introduced balance diagnostics of the circuits by the heating floor zones in the systems without the manifold.
| |
| * Added the possibility to supply multi-circuit heating floor zone from several manifolds.
| |
| * Introduced the possibility of supplying heating/cooling zones directly from the virtual or graphical source, without the usage of a manifold.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Calculation of cooling capacity for radiant systems (floor, wall or ceiling)]]
| |
| * [[How to calculate a file using a package configuration other than the one under which the file was created]]
| |
| * [[Installation with underfloor and wall radiant heating system in single family building]]
| |
| | |
| ===Version BETA 16.1 Rev. 15.5.17===
| |
| ====Modules:====
| |
| '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * Added new tool to search and select items in the project.
| |
| * Improved the import and export of bases.
| |
| * Introduced the control of print range which based on the edition range and the elements' styles.
| |
| * Introduced the possibility to highlight and select project's elements to which messages on the diagnostic list referred to.
| |
| * Added the possibility to highlight on the worksheet elements forming the circuit of specified receptor from this worksheet.
| |
| | |
| '''''<IS_TS id=PH_5_RL/>'''''
| |
| * Improved the functionality of pipe feed automatic generation.
| |
| | |
| ====Articles in HelpSystem:====
| |
| * [[Software configuration]]
| |
| | |
| ===Version BETA 15.1 Rev. 15.4.21===
| |
| ====Initial scope of modules:====
| |
| * '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
| |
| * '''''<IS_TS id=PH_5_RL/>'''''
| |
| * '''''<IS_TS id=PH_5_C/>'''''
| |
| * '''''<IS_TS id=PH_5_H/>'''''
| |
| * '''''<IS_TS id=PH_5_gbXML/>'''''
| |
| ====Initial state of articles in HelpSystem====
| |
| * [[Technical specifications of InstalSystem 5 package]]
| |
| * [[Introduction to the work with the package InstalSystem 5]]-->
| |
| | |
| [[Category:InstalSystem 5]]
| |
| [[Category:PRODUCT INFORMATION]]
| |
| [[it:Informazioni sulle pubblicazioni InstalSystem 5]]
| |
| [[pl:Informacje o publikacjach InstalSystem 5]]
| |
| [[lt:InstalSystem 5 Pastabos apie versiją]]
| |
| [[bg:Информация относно промени в InstalSystem 5]]
| |
| [[zh-cn:InstalSystem 5 版本发布说明]]
| |
| | |
|
| |
|
|
| |
|