InstalSystem 5 版本发布说明：修订间差异

来自HelpSystem
跳转到导航 跳转到搜索
无编辑摘要
第15行： 第15行：
|v4                =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
|v4                =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
}}
}}
==Information about changes==
<!--In the absence of changes, standard text is published: "There were no significant functional changes in this release."-->
<!--===<span style="color: grey;">''RELEASE Rev. XX.Y (planned)''</span>===-->
===<span style="color: grey;">''RELEASE Rev. 17.0 (planned)''</span>===
'''<IS_TS id=PH_ISNS5_BASE/>'''
* When inserting an opening in a sloping roof plane, the "z" coordinates  of corner points are determined automatically
* In the ''<IS_TS id=StoreyManagement/>'' window, the values ''<IS_TS id=strLblRzednaKondCaption/>'' and ''<IS_TS id=strLblWysokoscKondygnacjiCaption/>'' are editable, and the complement each other for adjacent stories
* For the top floor, ''<IS_TS id=RzednaSzczytuDachuCaption/>'' property has been added, the change of which corrects the height of that floor
* The option of distinguishing the style and label of a "manual" room (drawn directly) from "automatic" (generated automatically based on the arrangement of walls and slabs) has been introduced.
* When drawing elements "roof edge", ''<IS_TS id=rpOtworWdachu/>'', ''<IS_TS id=Lukarna/>'' in AUTO mode, snapping to DWG base elements is carried out
* In the calculations of the building structure, ''<IS_TS id=ScianyNakladajaSieAlboBledniePolaczone/>'' diagnostics was introduced. The contested elements are indicated in the graphical editor
* In the ''<IS_TS id=btUstawienia/>'' tab, sub-tab: ''<IS_TS id=btUstawieniaWygladEkranu/>'', checkbox ''<IS_TS id=disableAdvancedTransparency/>' has been added. Checking can make it easier to work on computers with weaker graphics cards.
* The '''<IS_TS id=pcstrXY/>'' tab has been added to the configuration of element label styles, where you can specify the default position of the label relative to the parent.
'''<IS_TS id=PH_IS5_H/>'''
* ''<IS_TS id=iNameHyperlinkRozw/>'' - new functionality available - BETA version
* The ''<IS_TS id=iNameCOKociol/>'' element was introduced as one of the possible properties of the element ''<IS_TS id=iNameCOZrodlo/>'' in the field ''<IS_TS id=strpnZrodloWyglad/>''
* Enabled declaration of dimensions of ''<IS_TS id=iNameCOElementONarzOporze/>'' element from 1 cm.
'''<IS_TS id=PH_IS5_RL/>'''
* Ergonomy of corrections of pipe loops and pipe feeds drawings generated automatically and drawn manually has been improved.
* New criterion of pipe feeds arrangement -AUTO- has been added to ''<IS_TS id=rpStrefaPrzylaczy/>'' tool.
'''<IS_TS id=PH_IS5_RP/>'''
* In the general data and in the data table of the element ''<IS_TS id=strefaPaneliSufitowych/>'' the possibility of declaration of automatic placement of adjacent rows of panels in the zone with mutual offset has been introduced.
'''<IS_TS id=PH_IS5_T/>'''
* For sanitary appliances, it is possible to declare the frame.
* A declaration of default manifold types has been introduced in the general data.
===RELEASE Rev. 16.2===
* There were no significant functional changes in this release.
====Articles in HelpSystem:====
* [[Designing of water supply system installation]]
* [[Heating/cooling zone build-up editor]] (actualized)
* [[How to eliminate: "Cannot apply any pipe spacing"]]
===RELEASE Rev. 16.1===
* There were no significant functional changes in this release.
====Articles in HelpSystem:====
* [[General recommendations for users of InstalSystem 4 starting work with InstalSystem 5]]
===RELEASE Rev. 16.0===
'''<IS_TS id=PH_ISNS5_BASE/>'''
* Many elements of the installation (radiator, valve, pump, etc.) by default are inserted with label.
* Possibility of precise control of pipe-runs arrangement, with different ordinates of the beginning and end of the pipe-run (case of pipe-runs carried out in inclined ceilings / walls).
'''<IS_TS id=PH_IS5_H/>'''
* Possibility to declare (''<IS_TS id=rsDanogi/>'' window, ''<IS_TS id=StoreyManagement/>'' tab) the default distance from the floor separately of the supply and return pipe-runs.
'''<IS_TS id=PH_IS5_T/>'''
* Possibility to declare (''<IS_TS id=rsDanogi/>'' window, ''<IS_TS id=StoreyManagement/>'' tab) the default distance from the floor separately of the hot water, cold water and circulation pipe-runs.
* Rearrangement of general data tabs.
* New element of the installation - linear drain.
'''<IS_TS id=PH_IS5_SM/>'''
* New module enabling the design of heating and water supply installations with the use of flat stations.
====Articles in HelpSystem:====
* [[Calculation of design heat load of rooms]] (actualized)
* [[Manifold and accessories]] (actualized)
* [[Pipe feeds route and editing pipe feeds in a radiant system]] (actualized)
* [[Pipe feeds route - Good practices and use cases]] (actualized)
===RELEASE Rev. 15.3===
* There were no significant functional changes in this release.
===RELEASE Rev. 15.2===
* There were no significant functional changes in this release.
===RELEASE Rev. 15.1===
'''<IS_TS id=PH_ISNS5_BASE/>'''
* List of elements displayed in window ''<IS_TS id=ProjectBrowser/>'' ia automatically adapted to currently edited edit scope.
* ''<IS_TS id=strDlgKatalogiObslugaKatalogowHint/>'' window - tabs have been replaced by more precise catalogue filters
* Window ''<IS_TS id=View3D/>'' - possibility to display edges of the elements (available under the button ''<IS_TS id=btShowEdges/>''/''<IS_TS id=btHideEdges/>'' in section ''<IS_TS id=rsView/>'')
* The ability to generate rooms, whose whole area is located in another room
'''<IS_TS id=PH_IS5_H/>'''/ '''<IS_TS id=PH_IS5_C/>'''
* Settings from tab ''<IS_TS id=DomyslneZaworyIArmatura/>'' have been moved to tabs: ''<IS_TS id=InstalacjaRozprowadzajaca/>''-''<IS_TS id=DaneInstalacjiRozprowadzajacejCzynnikGrzewczyChlodniczy/>'' and ''<IS_TS id=iNameCOGrzejnikPlural/>''-''<IS_TS id=GrzejnikiTypyIDane/>'' (tab ''<IS_TS id=DomyslneZaworyIArmatura/>'' has been removed).
'''<IS_TS id=PH_IS5_HL/>'''
* Enabling module ''<IS_TS id=ObliczeniaCieplneBudynku/>'' automatically switches common project setting: ''<IS_TS id=strs_enumidISFOZCDaneOgolneStrataCieplaCalcKindForNewPom/>'' into variant ''<IS_TS id=rsOZCPomieszczenieStrataCieplaCalcKindWgWskaznika/>''
* Enabled correction of room internal temperature (''<IS_TS id=strTempPomOgrzewanieSymbol/>'') of standard room types.
'''<IS_TS id=PH_IS5_RL/>'''
* Manifold can be placed on a drawing in horizontal position or with upward outlet ports (configuration via new field in data table ''<IS_TS id=strpnOrientation/>'').
*  In the tab ''<IS_TS id=sOpcjeObliczen/>'' in ''<IS_TS id=rsDanogi/>'' window ''<IS_TS id=SpecyficzneOpcjeRynkoweOP/>'' has been added - possibility to choose the method of the calculation without a surplus to flow rate for compensation of heat flow to the other side of the ''<IS_TS id=strPGCh/>''
'''<IS_TS id=PH_IS5_RP/>'''
* <IS_TS id=DataEditorTable/> window of element <IS_TS id=PanelScienny/>/<IS_TS id=iNameCOPanelSufitowy/> - <IS_TS id=stringdpmax/> field has been added thus enabling control of maximum pressure drop in single panel or set of panels in serial connection.
'''<IS_TS id=PH_IS5_T/>'''
* Water supply installations designing module - availability depending on package
====Articles in HelpSystem:====
* [[Installation with cooling radiant and panel systems in multifunctional building]]
* [[Preparation of building structure - Multi-storey rooms]]
* [[Software configuration - Project table]]
===RELEASE Rev. 14.2===
* The amount and content of neutral product databases available in different language versions has been unified, what will facilitate the transfer of projects between versions.
===RELEASE Rev. 14.1===
* There were no significant functional changes in this release.
====Articles in HelpSystem:====
* [[Installation with underfloor and wall radiant heating system in single family building]] (actualized)
===RELEASE Rev. 14.0===
====Modules:====
'''<IS_TS id=PH_ISNS5_BASE/>'''
* A new access to PDF creation of text printouts. If the appropriate driver is installed in the system, the program uses it and provides the ''<IS_TS id=PDFPrint/>''  button directly in the print module's toolbar.
* Possibility to declare the angle (rotation) of fittings (valve, filter etc.)  relative to the pipeline axis (Window: ''<IS_TS id=DataEditorTable/>'', field: ''<IS_TS id=KatObrotu/>'').
* New (separate) style and label for the ''<IS_TS id=ObrysBud/>'' element.
* New field ''<IS_TS id=OdlegloscOdPodlogiCaption/>'' in the data table of the element ''<IS_TS id=iNameDzialka/>''. Facilitates the control of the elevation of the network and allows correct copying of the repetitive installation to other floors.
* Attractive graphic styles of certain elements in ''<IS_TS id=View3D/>'', including elements of the building structure.
'''<IS_TS id=PH_IS5_RL/>'''
* ''<IS_TS id=strOptimizationChart/>'' presenting the quality of supply temperature (''<IS_TS id=TemperaturaZasilaniaOPSymbol/>'') in consideration of heating requirements of zones. Available in window ''<IS_TS id=rsDanogi/>'' on the tab: ''<IS_TS id=iNameCOZrodloPlural/>'', after first calculations.
* New templates for ''<IS_TS id=iNameTabelkaRozdzielacza/>''
* New field ''<IS_TS id=strPlytaSyst/>'' in window ''<IS_TS id=rsDanogi/>'' on the tab: ''<IS_TS id=DaneInstalacjiPodlogowych/>'' allows declaration of default system plate.
'''<IS_TS id=PH_IS5_HL/>'''
* Improvement of the algorithm recognizing the area of the wall above the windows in a wall adjacent to ground, located entirely below the ground.
====Articles in HelpSystem:====
* [[Introduction to the work with the package InstalSystem 5]] (actualized)
===RELEASE Rev. 13.3===
====Modules:====
'''<IS_TS id=PH_ISNS5_BASE/>'''
* Improvements of algorithm responsible for shaping the roof slopes
===RELEASE Rev. 13.2===
* There were no significant functional changes in this release.
===RELEASE Rev. 13.1===
====Modules:====
'''<IS_TS id=PH_ISNS5_BASE/>'''
* Rearrangement of icons in ''<IS_TS id=lystrFloors/>''
'''<IS_TS id=PH_IS5_RL/>'''
* Reconstruction and improvements of  ''<IS_TS id=ShowInteractiveCalculationWindow/>''
===RELEASE Rev. 13.0===
====Modules:====
'''<IS_TS id=PH_ISNS5_BASE/>'''
* Headers of result tables can be locked and visible while scrolling tables.
'''<IS_TS id=PH_IS5_HL/>'''
* Possibility to assign thermal partition definition (with defined U value) to construction partition of the same type, irrespective to its thickness.
'''<IS_TS id=PH_IS5_RL/>'''
* Pipe-feeds for underfloor heating/cooling system can be laid in insulation layer (below heating/cooling pipes in the screed)
* Possibility to change orientation (vertically or horizontally) of the ''<IS_TS id=iNameCOReduktorTemp/>''.
* New label for element ''<IS_TS id=iNameCOReduktorTemp/>''.
* <IS_TS id=iNameTabelkaMieszacza/>
* Improvements of algorithm which determines supply temperature for radiant systems.
* Improvements of algorithm which divides element ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' into ''<IS_TS id=strPGCh/>''.
* Diagnostics of laminar flow.
'''<IS_TS id=PH_IS5_H/>''' and '''<IS_TS id=PH_IS5_C/>'''
* More connection variants for element ''<IS_TS id=iNameCOElementONarzOporze/>''.
====Articles in HelpSystem:====
* [[Problems with the application on computers with integrated graphics card]]
===RELEASE Rev. 12.2===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' ''<IS_TS id=PH_5_PM/>'''''
* Improvement of Autosave function
'''''<IS_TS id=PH_5_C/>'''''
*  Implemented cooling system module - availability depending on  package
===RELEASE Rev. 12.1===
* There were no significant functional changes in this release.
===RELEASE Rev. 12.0===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improvement of ''<IS_TS id=strAUTOModeName/>'' mode.
* Diagnostics of available graphics cards.
'''''<IS_TS id=PH_IS5_DOG/>'''''
* Display of radiator output for manually selected sizes through the ''<IS_TS id=DataEditorTable/>''.
'''''<IS_TS id=PH_5_RP/>'''''
* Improvement of readability of ''<IS_TS id=iNameTabelkaRozdzielacza/>''.
* Improvement of algorithm determining drop of temperature on the set of serially connected panels.
===RELEASE Rev. 11.0===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>''''
* Improved function ''<IS_TS id=PartitionsGenerator/>''.
* Improved zoom scale and the preview scale.
* Improved diagnostics concerning errors in the building structure.
* Supplemented information presented in the result tables.
* Integration of ''<IS_TS id=PaperFormat/>'' element with ''<IS_TS id=PrintoutPages_ElementName/>'' element.
'''''<IS_TS id=PH_IS5_RL/>'''''
* Improved algorithm of heat output calculations of ''Heated by pipe feeds'' floor type connected virtually.
* Improved algorithm which automatically inserts a heating/cooling floors into rooms with a hole in the slab.
'''''<IS_TS id=PH_IS5_H/>'''''
* Improved automatic connections of integrated radiators to distrubution pipes, depending on the configuration: valve shape (straight, angle) and connection direction (from the floor, from the wall).
'''<IS_TS id=PH_IS5_RP/>'''
* Improved flow rates calculations for the serial-connected panels.
===RELEASE Rev. 9.2===
* There were no significant functional changes in this release.
===RELEASE Rev. 9.1===
* There were no significant functional changes in this release.
===RELEASE Rev. 9.0===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Added declare multi-wing doors and windows.
* Added the appearance configuration of the ''<IS_TS id=iNameReferencePoint/>''.
* ''AUTO'' mode has been extended of snap the vertices ''<IS_TS id=rpOtworWstropie/>'' to elements from the DWG underlay.
'''''<IS_TS id=PH_5_RL/>'''''
* Improved algorithm of insert ''Heating floor'' in multi-storey rooms (with ''Opening in slab'').
* Implemented automatic algorithm which cuts ''Heating wall'' lying in the area of windows / doors.
'''''<IS_TS id=PH_5_HL/>'''''
* Added the possibility of defining ''Tolerance relative to thickness of graphical partition'' (wall, ceilings and roofs), that the ''Partition definitions'' will be assign.
'''''<IS_TS id=PH_5_RP/>'''''
* Improved determination of the optimal refrigerating level (Δθ) for the serial-connected panels.
* Maximum height position for the panels has been increased to 30 m.
* Expanded information of the flow rate for panel hint and panel label.
===RELEASE Rev. 8.0===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improved diagnostics for incomplete data when ''Generate walls and slabs from rooms and building contour'' algorithm has launched.
* Room label - added the ability of display the ''<IS_TS id=sOpis/>'' field.
* Added the possibilty of creating default room types (with their data and parameters).
* Added configure the appearance of elements during their insertion operations.
* Improved the ergonomy of filling graphic elements data.
'''''<IS_TS id=PH_5_HL/>'''''
* Changed diagnostics from error to warning for ''Partition definitions'' with no thickness filled for ''Part. with specified U (Heat transfer coefficient)''.
===RELEASE Rev. 7.3===
* There were no significant functional changes in this release.
===RELEASE Rev. 7.2===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* New diagnostic messages for incorrect or incomplete building structure data have been introduced.
* The rank of the message with zero thickness of the partition definition has been reduced to a warning or hint (when the definition has no default status).
'''''<IS_TS id=PH_5_RP/>'''''
* "Zone of ceiling panels" tool has been improved and developed.
====Articles in HelpSystem:====
* [[How to eliminate: "Unbalanced circuit of terminal unit "XY"..."]]
===RELEASE Rev. 6.1===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Added A0 and A1 formats to printout pages.
* Improved AUTO and ORTO modes.
'''''<IS_TS id=PH_IS5_DOG/>'''''
* Added possibility to display in radiator’s label setting of valves insert.
* Allowed defining in project options default distance of radiator from wall.
* Improved graphical presentation of radiators mounting items (so-called consoles) on plan views.
'''''<IS_TS id=PH_5_RL/>'''''
* Added possibility to choose criterion of supply temperature optimization in radiant systems with correction of the algorithm's operation.
* Improved algorithm of automatic division Heating/Cooling Zones into Heating/Cooling Areas.
* Improved algorithm of automatic drawings of radiant heating/cooling loops.
====Articles in HelpSystem:====
* [[How to include the drawing loop lenght in the calculations?]]
* [[Preparation of building structure]] (actualized)
* [[Appending drawings with radiant system loops]] (actualized)
* [[Inserting plates in dry floor heating system]]
===RELEASE Rev. 5.1===
* There were no significant functional changes in this release.
===RELEASE Rev. 5.0===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Added dimension lines.
'''''<IS_TS id=PH_5_RL/>'''''
* Improved the algorithm of automatic division of heating/cooling floor zone.
* Improved presentation of RHC loop drawing on 3D view.
* Extended functionality of pipe feed route to automatically fill the entire width of the stip with pipe feeds.
====Articles in HelpSystem:====
* [[Automatically connect terminal units]]
* [[Editing pipe feeds in a radiant system - Good practices and use cases]]
* [[Software configuration]] (actualized)
* [[Radiant heating systems - how to improve thermal and hydraulic results]]
* [[Design of radiant heating floor and wall installation]] (actualized)
* [[Design based on a project file from InstalSystem 4]]
* [[Designing radiant (ceiling, wall) panel heating/cooling systems]] (actualized)
* [[Designing radiant heating systems with pipe-runs as distribution system]] (actualized)
===RELEASE Rev. 4.0===
====Modules:====
'''''<IS_TS id=PH_5_RL/>'''''
* Improved the algorithm drawing the RHC loop.
'''''<IS_TS id=PH_5_RP/>'''''
* Added ceiling panels zone - tool for automatic stacking of ceiling panels.
====Articles in HelpSystem:====
* [[Import of building model from BIM compatible formats]]
* [[Import underlay files]] (actualized)
* [[Radiant steel ceiling panels]] (actualized)
* [[Preparation of building structure - Creation of roofs with different construction]]
* [[Preparation of building structure]] (actualized)
===RELEASE Rev. 2.2===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Added possibility to saved files read-only.
* 3D view printout has been avaliable.
====Articles in HelpSystem:====
* [[Calculation of design heat load of rooms]]
* [[Designing radiant (ceiling, wall) panel heating/cooling systems]] (actualized)
* [[How to eliminate: "Automatic division of H/C Zone not possible"]]
* [[Presentation of the calculations result]]
===RELEASE Rev. 2.1===
* There were no significant functional changes in this release..
===RELEASE Rev. 2.0===
====Initial scope of modules:====
* '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* '''''<IS_TS id=PH_5_HL/>'''''
* '''''<IS_TS id=PH_IS5_DOG/>'''''
* '''''<IS_TS id=PH_5_RL/>'''''
* '''''<IS_TS id=PH_5_RP/>'''''
* '''''<IS_TS id=PH_5_RLD/>'''''
* '''''<IS_TS id=PH_5_H/>'''''
* '''''<IS_TS id=PH_5_C/>'''''
* '''Interface gbXML (BIM)'''
====Initial state of information materials====
* [[InstalSystem 5]]
<!--* TUTAJ DODAĆ LINK DO STRONY WWW Z PRODUKTAMI INSTALSYSTEM 5-->
<!--===Version BETA Rev. 2.0.B5===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>''''
* Introduced term licences as additional licensing option (available for selected packages) with mechanisms supporting term and renewal control (''Change license'' tab),
* Introduced demo version (available for selected packages).
* Added the ability to define window layouts.
* The ''AUTO'' mode has been enhanced when inserting the ''Reference point''.
* Organized tab ''Sources'' in the ''General data'' in order to improve the ergonomics and intuitive editing data.
* The field ''Floor'' in the ''Storeys management'' obtained an additional ''AUTO'' status (the value is based on the typical floor heating thickness).
* Added the ability to quickly locate and select the active elements windows for which diagnostic message shows.
* Added the ability to enter text desctiprions and notes in the ''2D editor'' (icons: ''Text'' and ''Note'' in the group ''Labels and graphics'').
===Version BETA Rev. 2.0.B4===
====Modules:====
'''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''
* Put in order access to the most important diagnostic messages.
* Diagnostics has been added to report errors during roof generating.
* Added button which allows quick access to component style from the data table.
* Improved ''Automatically connect terminal units'' function for quick removal of redundant pipe-runs.
* Changed default unit (from ''m'' to ''mm'') for the storeys data field ''Floor''.
* Predefined result project file names have been introduced.
* Changed the name of the ''Upgrade'' button in Manager for ''Licence change'' button while preserving its original functionality.
'''''<IS_TS id=PH_5_HL/>'''''
* The format ''Heat losses data'' moved from the ''H&E'' window to the ''General Data'' window.
'''''<IS_TS id=PH_5_RL/>'''''
* Added the ability to define the default type of 3D valve in the mixer.
* The default mixer size has been corrected.
===Version BETA Rev. 2.0.B3===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Edit tabs in graphical editor got two new states of visibility:
** ''Translucent when active''  - useful when analyzing the partition definitions and graphics partitions in 3D.
** ''The only one visible when inactive'' - automatically inactivates other ranges, regardless of their own settings.
'''''<IS_TS id=PH_5_HL/>'''''
* Multi-storey rooms  are recognized (equivalent to ''interconnected rooms'' in version 4). A multi-storey room is automatically created in the absence of a slab between rooms on adjacent floors when the slab does not cover the whole projection of the room or when the slab has an active opening in slab.
* It is possible to select partition definitions as ''default for this type and dimensions'' also in the project browser tree, using the pop-up menu.
* It is possible to specify the thickness for the partition definitions without layers (Partition with specified "U") so that they can also be assigned automatically.
====Articles in HelpSystem:====
* [[Appending drawings with radiant system loops]] (actualized)
* [[Technical specifications of InstalSystem 5 package]] (actualized)
===Version BETA Rev. 2.0.B2===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Fixed walls connecting generated automatically by the partitions generator.
* Fixed connecting fragments of the underlay in .pdf format.
* Standardized the list of kinds and types of rooms.
* Allowed quickly switching between worksheets in a graphical editor using the arrows next to the selection window of the worksheets.
'''''<IS_TS id=PH_5_RL/>'''''
* Moved window of control circuit settings to Thermal systems sources in the General Data.
* Allowed to replace virtual temperature sources with graphic elements by ugins a special button in the control circuit settings in the General Data.
===Version BETA Rev. 2.0.B1===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Introduced the ability to search elements in the Project browser based on a string of signs.
* Allowed to insert dormers.
====Articles in HelpSystem:====
* [[Designing heating systems with convective radiators]]
* [[Designing of radiant heating installation on the basis of data from the Smart application]]
* [[Heating/cooling zone]]
* [[Using catalogs and catalogs data in the project]]
===Version BETA 37 Rev. 0.0.B37===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improved efficiency of the program in handling with complex projects, time of files upload and regeneration of the 3D view.
'''''<IS_TS id=PH_5_DOG/>'''''
* Added the ability to search of radiators and valves placed on the radiators in the search window of elements in the project.
'''''<IS_TS id=PH_5_HL/>'''''
* Introduced heat loss (thermal load) module in accordance with standard EN 12831.
====Articles in HelpSystem:====
* [[Preparation of building structure]] (actualized)
* [[Smart application - Quick selection of system components]] (actualized)
===Version BETA 35 Rev. 0.0.B35===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Raising the ergonomics of editing the roof by multiedit few vertices at the same time.
* Merge and trim functions identify the premises in one operation.
* Introduced new physical elements - arched Windows and doors.
* Introduced new physical element - Opening in slab.
* Improved support for facilities construction if the hole in the roof.
* Introduced new feature - Building contour.
* Introduced the interpretation of walls based on stroke building.
* Introduced a new feature - Partitions generator.
====Articles in HelpSystem:====
* [[Editing pipe feeds in a radiant system]] (actualized)
* [[General data]]
* [[Import files]] (actualized)
* [[Manifold and accessories]] (actualized)
* [[Preparation of building structure]]
===Version BETA 34 Rev. 0.0.B34===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improved import files created in InstalSystem 4 for automatic deletion of elements that are not supported in InstalSystem 5.
* Improved ''Wall'' connection.
* Integrated a full range of Construction processing operations.
'''''<IS_TS id=PH_5_DOG/>'''''
* Expanded radiator sizing in ''Addition for thermostat'' and ''Addition for casing/chanel''.
* Expanded operations on the elements ''Radiators'' about the possibility of ''Flip horizontal''.
====Articles in HelpSystem:====
* [[Design of radiant heating/radiant cooling installation]]
* [[Designing radiant (ceiling, wall) panel heating/cooling systems]]
* [[Designing radiant heating systems with pipe-runs as distribution system]]
* [[Radiant steel ceiling panels]]
===Version BETA 33 Rev. 0.0.B33===
====Modules:====
'''''<IS_TS id=PH_5_RL/>'''''
* Improved the data propagation from ''Room'' elements created with walls to the ''Heating/Cooling Wall Zone'' elements.
'''''<IS_TS id=PH_5_DOG/>'''''
* Improved the data propagation from ''Room'' elements created with walls to the ''Radiator'' elements.
===Version BETA 32 Rev. 0.0.B32===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Introduced the ability of creating rooms due to other building structure's elements inserted in the project.
* Introduced the ability of dividing roof into parts and added new functionality which allows to change ordinates of individual points at the roof's outline to model its real surface.
* Introduced new physical element - roof window.
* Introduced new physical element - recess.
* Improved evaluating the location of the elements above the plane of the floor.
* Increased the ergonomy of label editor.
'''''<IS_TS id=PH_5_DOG/>'''''
* Introduced radiator sizing in basic scope. This functionality will be completed and developed in the next beta versions.
====Articles in HelpSystem:====
* [[Design of radiant heating floor and wall installation]]
===Version BETA 31 Rev. 0.0.B31===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Introduced a new conception for wall element and the functionality of connecting walls.
* Indroduced new physical element - the slab.
* Indroduced new physical element - the roof.
* Expanded function "Shadow of a storey" for possibility to declare shadows displayed for all stories below.
'''''<IS_TS id=PH_5_RP/>'''''
* Introduced possibility of calculating thermal output of ceiling/wall panels according to EN 1264 standard.
====Articles in HelpSystem:====
* [[Release notes InstalSystem Smart5]]
===Version BETA 30 Rev. 0.0.B30===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Allowed to control the content of diagnostic messages using the checkbox "Messages for selected components" on the list of filters in the diagnostics window.
* Introduced the possibility to handle by the distribution system mail domains with the sign "-".
'''''<IS_TS id=PH_5_RP/>'''''
* Taken into account results for panels in the radiant heating general results.
* Introduced the presentation of panels connection points on 3D view.
====Articles in HelpSystem:====
* [[Editing pipe feeds in a radiant system]] (atualizado)
* [[How to eliminate problems with the diagnostic message: "Automatic arrangement of pipe feeds not possible - change pipe feeds route or H/C Zone parameters or arrange pipe feeds manually"]]
* [[Smart application - Quick selection of system components]]
===Version BETA 29 Rev. 16.5.1===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Allowed handling of mail domains containing sign "-" by the licence distribution system.
* Improved stability of the program during pasting complex installations.
* Introduced the ability to display the storeys shadow above and below on 2D view.
* For each element with snapping possibility added the ability to set in the AUTO mode a parameter which predetermine distance from the edge of another inserted element.
'''''<IS_TS id=PH_5_RL/>'''''
* Corrected a bug related to the manual connecting RHC loop directly to the manifold (without pipe-runs).
'''''<IS_TS id=PH_5_RP/>'''''
* Allowed the presentation of data in the printout of 'Manifold table' for panel systems installation.
'''''<IS_TS id=PH_5_RLD/>'''''
* Introduced dry system to the neutral catalogue of radiant heating systems.
====Articles in HelpSystem:====
* [[Installation, activation and update InstalSystem 5 package]]
* [[Manifold and accessories]]
* [[Project and application management]]
===Version BETA 28 Rev. 16.4.1===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improved the automatic snapping of pipe-runs for the ORTO mode.
* Improved the function of rooms interpretation for files imported from '''[[InstalSystem 4]]''' package.
* Introduced the ability to insert into the project construction elements: ''Wall'', ''Window'', ''Door'', ''Opening in wall''.
'''''<IS_TS id=PH_5_RP/>'''''
* Introduced the possibility to insert into the project element ''Ceiling false panel'' (panel with no connection).
* Added the cooling result card for panel installation: ''General results cooling''.
* Included elements: ''Wall panel'' and ''Ceiling panel'' in results card: ''General results heating''.
===Version BETA 27 Rev. 16.3.1===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improved function 'automatically connect terminal units'.
* Made available the ability to configure the buttons to select a group of elements (SHIFT and CTRL).
* Introduced possibility of selecting 'None' in the climatic data in case of lack of apropriate climatic data catalogue in the program.
* Added the function of the graphic presentation of the route of flow from a given receiver to the source.
* Added the function of the graphic presentation of routes flow from the source (manifold, source) to all receivers, which it supplies.
'''''<IS_TS id=PH_5_RP/>'''''
* Introduced handling underfloor panels which lead the pipes in dry systems of radiant heating.
===Version BETA 26 Rev. 16.2.1===
====Modules:====
'''',<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improved saving files in a network location.
* Introduced the possibility to choose the source for which you want to appear the critical circuit.
===Version BETA 25 Rev. 16.1.1===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Added function that allows automatically connect terminal units.
* Added possibility of quick creating rectangular room with sides parallel to the X, Y by drawing diagonal of the room.
* The problem with sending Problem Report Form is eliminated.
'''''<IS_TS id=PH_5_RP/>'''''
* Added function that allows connect panels in series.
* Introduced the possibility to design heating/cooling installations using ceiling/wall panels (including radiant steel ceiling panels).<br/>''Attention! Required upgrade to the configuration with the new module (InstalSystem Manager - tab "Upgrade").
====Articles in HelpSystem:====
* [[Connecting storeys with the "Stack" element]]
* [[View navigation in the graphical editor]]
* [[Combine base files]]
===Version BETA 24 Rev. 15.12.1===
''Warning! For this version of the program the reinstallation is necessary.''
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improved stability and quality of the program.
'''''<IS_TS id=PH_5_RL/>'''''
* Added a message about the lack of possibility for editing automatically generated pipe feeds/RHC loops.
* Standarized the content of data table for heating/cooling zones at various ranges of editing.
* Introduced permanent visibility of the field ''Pipe laying pattern'' in the data table for heating/cooling zones.
* Fixed an error that occurs while connecting pipe feeds route to the heating/cooling zone.
====Articles in HelpSystem:====
* [[Export / print results and drawings]]
* [[Software configuration]] (actualized)
===Version BETA 23 Rev. 15.11.1===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Fixed the problem with sending the Problem report form.
* Added icons for the .isproj files displayed in the InstalSystem Manager and in the Windows Explorer's window.
* The scope of the displayed catalogues in the general data has been adapted to the available project scope for the package.
'''''<IS_TS id=PH_5_RL/>'''''
* Changed the designation of nodes in the grid which supports the manual drawing of the loop.
* Added message box indicating the inability to remove the RHC loop.
'''''<IS_TS id=PH_5_H/>'''''
* Fixed the automatic sizing of manifolds' cabinets.
* Improved the propagation of the default data for manifold cabinet.
====Articles in HelpSystem:====
* [[Editing pipe feeds in a radiant system]]
* [[How to make the program run faster]]
* [[Installation with ceiling heating and cooling system in commercial building]]
* [[Search components in the project]]
===Version BETA 22 Rev. 15.10.1===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Added graphical rulers (horizontal and vertical) to help verify the scale of loaded underlay.
* Improved ORTO and AUTO modes.
* Fixed the problem with sending error report form after crash of the program.
* Improved overall stability and quality of the program by eliminating the reported errors.
====Articles in HelpSystem:====
* [[Import files]]
* [[Appending drawings with radiant system loops]]
===Version BETA 21 Rev. 15.9.2===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Modified the way of importing base drawing files.
* Added a ''Select components in rectangle'' function under the left mouse button.
* Improved acting of ''ORTO'' mode when moving objects.
* Accelerated loading of the newly created or saved again files, as a consequence the files created on previous versions may load slower.
'''''<IS_TS id=PH_5_RL/>'''''
* Added the possibility of parallel connection of several RHC loop to one common outlet from the manifold.
* Introduced balance diagnostics of the RHC loop connected to the manifold with not integrated balancing valves, and the possibility of adding on the pipe-runs valves which are balancing these objects.
'''''<IS_TS id=PH_5_H/>'''''
* Added the possibility to use multi-circuit heating floor zone.
* Introduced balance diagnostics of the circuits by the heating floor zones in the systems without the manifold.
* Added the possibility to supply multi-circuit heating floor zone from several manifolds.
* Introduced the possibility of supplying heating/cooling zones directly from the virtual or graphical source, without the usage of a manifold.
====Articles in HelpSystem:====
* [[Calculation of cooling capacity for radiant systems (floor, wall or ceiling)]]
* [[How to calculate a file using a package configuration other than the one under which the file was created]]
* [[Installation with underfloor and wall radiant heating system in single family building]]
===Version BETA 16.1 Rev. 15.5.17===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Added new tool to search and select items in the project.
* Improved the import and export of bases.
* Introduced the control of print range which based on the edition range and the elements' styles.
* Introduced the possibility to highlight and select project's elements to which messages on the diagnostic list referred to.
* Added the possibility to highlight on the worksheet elements forming the circuit of specified receptor from this worksheet.
'''''<IS_TS id=PH_5_RL/>'''''
* Improved the functionality of pipe feed automatic generation.
====Articles in HelpSystem:====
* [[Software configuration]]
===Version BETA 15.1 Rev. 15.4.21===
====Initial scope of modules:====
* '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* '''''<IS_TS id=PH_5_RL/>'''''
* '''''<IS_TS id=PH_5_C/>'''''
* '''''<IS_TS id=PH_5_H/>'''''
* '''''<IS_TS id=PH_5_gbXML/>'''''
====Initial state of articles in HelpSystem====
* [[Technical specifications of InstalSystem 5 package]]
* [[Introduction to the work with the package InstalSystem 5]]-->
[[Category:InstalSystem 5]]
[[Category:PRODUCT INFORMATION]]
[[it:Informazioni sulle pubblicazioni InstalSystem 5]]
[[pl:Informacje o publikacjach InstalSystem 5]]
[[lt:InstalSystem 5 Pastabos apie versiją]]
[[bg:Информация относно промени в InstalSystem 5]]
[[zh-cn:InstalSystem 5 版本发布说明]]


==更新信息==
==更新信息==

2019年11月1日 (五) 08:59的版本

产品 InstalSystem 5
文章类型 产品信息
版本的最新内容 黄金版 16.0


Information about changes

RELEASE Rev. 17.0 (planned)

基本模块

  • When inserting an opening in a sloping roof plane, the "z" coordinates of corner points are determined automatically
  • In the 楼层管理 window, the values 楼层标高 and 楼层高度 are editable, and the complement each other for adjacent stories
  • For the top floor, 屋顶标高 property has been added, the change of which corrects the height of that floor
  • The option of distinguishing the style and label of a "manual" room (drawn directly) from "automatic" (generated automatically based on the arrangement of walls and slabs) has been introduced.
  • When drawing elements "roof edge", 屋顶开洞, 天窗 in AUTO mode, snapping to DWG base elements is carried out
  • In the calculations of the building structure, 墙有重叠或墙的连接不正确 diagnostics was introduced. The contested elements are indicated in the graphical editor
  • In the 设置 tab, sub-tab: 屏幕外观, checkbox 在3D上禁用透明度的高级呈现' has been added. Checking can make it easier to work on computers with weaker graphics cards.
  • The '位置 tab has been added to the configuration of element label styles, where you can specify the default position of the label relative to the parent.

供热系统

  • 系统自动示意图 - new functionality available - BETA version
  • The 锅炉 element was introduced as one of the possible properties of the element 源 in the field 源外观
  • Enabled declaration of dimensions of 末端装置 element from 1 cm.

盘管辐射系统

  • Ergonomy of corrections of pipe loops and pipe feeds drawings generated automatically and drawn manually has been improved.
  • New criterion of pipe feeds arrangement -AUTO- has been added to 引线管路径 tool.

辐射板系统

  • In the general data and in the data table of the element 顶面辐射板铺设区 the possibility of declaration of automatic placement of adjacent rows of panels in the zone with mutual offset has been introduced.

给水系统

  • For sanitary appliances, it is possible to declare the frame.
  • A declaration of default manifold types has been introduced in the general data.

RELEASE Rev. 16.2

  • There were no significant functional changes in this release.

Articles in HelpSystem:

RELEASE Rev. 16.1

  • There were no significant functional changes in this release.

Articles in HelpSystem:

RELEASE Rev. 16.0

基本模块

  • Many elements of the installation (radiator, valve, pump, etc.) by default are inserted with label.
  • Possibility of precise control of pipe-runs arrangement, with different ordinates of the beginning and end of the pipe-run (case of pipe-runs carried out in inclined ceilings / walls).

供热系统

  • Possibility to declare (一般参数 window, 楼层管理 tab) the default distance from the floor separately of the supply and return pipe-runs.

给水系统

  • Possibility to declare (一般参数 window, 楼层管理 tab) the default distance from the floor separately of the hot water, cold water and circulation pipe-runs.
  • Rearrangement of general data tabs.
  • New element of the installation - linear drain.

户用换热机组

  • New module enabling the design of heating and water supply installations with the use of flat stations.

Articles in HelpSystem:

RELEASE Rev. 15.3

  • There were no significant functional changes in this release.

RELEASE Rev. 15.2

  • There were no significant functional changes in this release.

RELEASE Rev. 15.1

基本模块

  • List of elements displayed in window 项目浏览器 ia automatically adapted to currently edited edit scope.
  • 目录 window - tabs have been replaced by more precise catalogue filters
  • Window 3D视图 - possibility to display edges of the elements (available under the button 显示边部/隐藏边部 in section 视图)
  • The ability to generate rooms, whose whole area is located in another room

供热系统/ 供冷系统

  • Settings from tab have been moved to tabs: 水力分配系统-默认类型和参数 and 散热器-散热器/散热器阀 - 型号和默认参数 (tab has been removed).

热损失

  • Enabling module 建筑热负荷计算 automatically switches common project setting: 建筑负荷 Φ 的计算方法 into variant 根据单位面积负荷计算
  • Enabled correction of room internal temperature (θi,供热) of standard room types.

盘管辐射系统

  • Manifold can be placed on a drawing in horizontal position or with upward outlet ports (configuration via new field in data table 方向).
  • In the tab 其它选项 in 一般参数 window 特定市场选项 has been added - possibility to choose the method of the calculation without a surplus to flow rate for compensation of heat flow to the other side of the 供热/供冷面

辐射板系统

  • 参数表 window of element 墙面辐射板/毛细管/顶面辐射板/毛细管网 - Δp最大 field has been added thus enabling control of maximum pressure drop in single panel or set of panels in serial connection.

给水系统

  • Water supply installations designing module - availability depending on package

Articles in HelpSystem:

RELEASE Rev. 14.2

  • The amount and content of neutral product databases available in different language versions has been unified, what will facilitate the transfer of projects between versions.

RELEASE Rev. 14.1

  • There were no significant functional changes in this release.

Articles in HelpSystem:

RELEASE Rev. 14.0

Modules:

基本模块

  • A new access to PDF creation of text printouts. If the appropriate driver is installed in the system, the program uses it and provides the 打印成PDF文件 button directly in the print module's toolbar.
  • Possibility to declare the angle (rotation) of fittings (valve, filter etc.) relative to the pipeline axis (Window: 参数表, field: 旋转角度).
  • New (separate) style and label for the 建筑外轮廓 element.
  • New field 与地面的距离（在楼层参数中设置） in the data table of the element 管路. Facilitates the control of the elevation of the network and allows correct copying of the repetitive installation to other floors.
  • Attractive graphic styles of certain elements in 3D视图, including elements of the building structure.

盘管辐射系统

  • 图形最佳化 presenting the quality of supply temperature (θ供,供热 辐射) in consideration of heating requirements of zones. Available in window 一般参数 on the tab: 源, after first calculations.
  • New templates for 分集水器设置表
  • New field 系统构造板 in window 一般参数 on the tab: 地面系统 allows declaration of default system plate.

热损失

  • Improvement of the algorithm recognizing the area of the wall above the windows in a wall adjacent to ground, located entirely below the ground.

Articles in HelpSystem:

RELEASE Rev. 13.3

Modules:

基本模块

  • Improvements of algorithm responsible for shaping the roof slopes

RELEASE Rev. 13.2

  • There were no significant functional changes in this release.

RELEASE Rev. 13.1

Modules:

基本模块

  • Rearrangement of icons in 建筑

盘管辐射系统

  • Reconstruction and improvements of 交互式辐射系统计算

RELEASE Rev. 13.0

Modules:

基本模块

  • Headers of result tables can be locked and visible while scrolling tables.

热损失

  • Possibility to assign thermal partition definition (with defined U value) to construction partition of the same type, irrespective to its thickness.

盘管辐射系统

  • Pipe-feeds for underfloor heating/cooling system can be laid in insulation layer (below heating/cooling pipes in the screed)
  • Possibility to change orientation (vertically or horizontally) of the 混水装置/泵站.
  • New label for element 混水装置/泵站.
  • 混水 / 控制装置图表
  • Improvements of algorithm which determines supply temperature for radiant systems.
  • Improvements of algorithm which divides element 供热/供冷区 into 供热/供冷面.
  • Diagnostics of laminar flow.

供热系统 and 供冷系统

  • More connection variants for element 末端装置.

Articles in HelpSystem:

RELEASE Rev. 12.2

Modules:

基本模块 软件包管理器

  • Improvement of Autosave function

  • Implemented cooling system module - availability depending on package

RELEASE Rev. 12.1

  • There were no significant functional changes in this release.

RELEASE Rev. 12.0

Modules:

基本模块 i 软件包管理器

  • Improvement of 捕捉 mode.
  • Diagnostics of available graphics cards.

散热器计算选型

  • Display of radiator output for manually selected sizes through the 参数表.

  • Improvement of readability of 分集水器设置表.
  • Improvement of algorithm determining drop of temperature on the set of serially connected panels.

RELEASE Rev. 11.0

Modules:

基本模块 i 软件包管理器'

  • Improved function 自动生成墙、楼板和屋顶.
  • Improved zoom scale and the preview scale.
  • Improved diagnostics concerning errors in the building structure.
  • Supplemented information presented in the result tables.
  • Integration of 图纸规格 element with 打印页面 element.

盘管辐射系统

  • Improved algorithm of heat output calculations of Heated by pipe feeds floor type connected virtually.
  • Improved algorithm which automatically inserts a heating/cooling floors into rooms with a hole in the slab.

供热系统

  • Improved automatic connections of integrated radiators to distrubution pipes, depending on the configuration: valve shape (straight, angle) and connection direction (from the floor, from the wall).

辐射板系统

  • Improved flow rates calculations for the serial-connected panels.

RELEASE Rev. 9.2

  • There were no significant functional changes in this release.

RELEASE Rev. 9.1

  • There were no significant functional changes in this release.

RELEASE Rev. 9.0

Modules:

基本模块 i 软件包管理器

  • Added declare multi-wing doors and windows.
  • Added the appearance configuration of the 参考点.
  • AUTO mode has been extended of snap the vertices 楼板开洞 to elements from the DWG underlay.

  • Improved algorithm of insert Heating floor in multi-storey rooms (with Opening in slab).
  • Implemented automatic algorithm which cuts Heating wall lying in the area of windows / doors.

  • Added the possibility of defining Tolerance relative to thickness of graphical partition (wall, ceilings and roofs), that the Partition definitions will be assign.

  • Improved determination of the optimal refrigerating level (Δθ) for the serial-connected panels.
  • Maximum height position for the panels has been increased to 30 m.
  • Expanded information of the flow rate for panel hint and panel label.

RELEASE Rev. 8.0

Modules:

基本模块 i 软件包管理器

  • Improved diagnostics for incomplete data when Generate walls and slabs from rooms and building contour algorithm has launched.
  • Room label - added the ability of display the 说明 field.
  • Added the possibilty of creating default room types (with their data and parameters).
  • Added configure the appearance of elements during their insertion operations.
  • Improved the ergonomy of filling graphic elements data.

  • Changed diagnostics from error to warning for Partition definitions with no thickness filled for Part. with specified U (Heat transfer coefficient).

RELEASE Rev. 7.3

  • There were no significant functional changes in this release.

RELEASE Rev. 7.2

Modules:

基本模块 i 软件包管理器

  • New diagnostic messages for incorrect or incomplete building structure data have been introduced.
  • The rank of the message with zero thickness of the partition definition has been reduced to a warning or hint (when the definition has no default status).

  • "Zone of ceiling panels" tool has been improved and developed.

Articles in HelpSystem:

RELEASE Rev. 6.1

Modules:

基本模块 i 软件包管理器

  • Added A0 and A1 formats to printout pages.
  • Improved AUTO and ORTO modes.

散热器计算选型

  • Added possibility to display in radiator’s label setting of valves insert.
  • Allowed defining in project options default distance of radiator from wall.
  • Improved graphical presentation of radiators mounting items (so-called consoles) on plan views.

  • Added possibility to choose criterion of supply temperature optimization in radiant systems with correction of the algorithm's operation.
  • Improved algorithm of automatic division Heating/Cooling Zones into Heating/Cooling Areas.
  • Improved algorithm of automatic drawings of radiant heating/cooling loops.

Articles in HelpSystem:

RELEASE Rev. 5.1

  • There were no significant functional changes in this release.

RELEASE Rev. 5.0

Modules:

基本模块 i 软件包管理器

  • Added dimension lines.

  • Improved the algorithm of automatic division of heating/cooling floor zone.
  • Improved presentation of RHC loop drawing on 3D view.
  • Extended functionality of pipe feed route to automatically fill the entire width of the stip with pipe feeds.

Articles in HelpSystem:

RELEASE Rev. 4.0

Modules:

  • Improved the algorithm drawing the RHC loop.

  • Added ceiling panels zone - tool for automatic stacking of ceiling panels.

Articles in HelpSystem:

RELEASE Rev. 2.2

Modules:

基本模块 i 软件包管理器

  • Added possibility to saved files read-only.
  • 3D view printout has been avaliable.

Articles in HelpSystem:

RELEASE Rev. 2.1

  • There were no significant functional changes in this release..

RELEASE Rev. 2.0

Initial scope of modules:

  • 基本模块 i 软件包管理器
  • 散热器计算选型
  • Interface gbXML (BIM)

Initial state of information materials


更新信息

16.0 版更新

基本模块

  • 省缺情况下，系统中的许多部件（散热器、阀门、泵等）都会带标签插入。
  • 增加了精确控制管道布置的可能性，管道开始和结束点的坐标可不同（如在斜屋顶和墙面上布置管道等）。

供热系统

  • 可以在 (一般参数 窗口, 楼层管理 选项卡) 分别声明供回水主管路与地面的的省缺距离。

给水系统

  • 可以在 (一般参数 窗口, 楼层管理 选项卡) 分别声明热水管路、冷水管路和热循环管路与地面的省缺距离.
  • 重新布置了屏幕上方的常规数据选项卡
  • 新的系统安装部件 - 线性排水管

户用换热机组

  • 新增用于供热和给水系统中使用的小型家用换热机组

15.3 版更新

  • 本次更新功能上无显著变化

15.2 版更新

  • 本次更新功能上无显著变化

15.1 版更新

基本模块

  • 在项目浏览器 窗口中显示的部件列表自动适应当前编辑的编辑范围。
  • 在目录 窗口中 - 标签已被更精确的目录过滤器替换。
  • 在3D视图 窗口中显示部件边缘的可能性（在断面视图 中有显示边部/隐藏边部 的按钮）。
  • 增加了在一个房间内可再创建一个房间的能力。

供热系统/ 供冷系统

  • 一般参数窗口中的 的设置 - 移到了水力分配系统-默认类型和参数 和 散热器-散热器/散热器阀 - 型号和默认参数 中。

热损失

  • 启动建筑热负荷计算 模块自动将普通项目的设置: 建筑负荷 Φ 的计算方法 根据单位面积负荷计算 切换至根据标准计算。
  • 允许修改标准房间类型的室内设计温度(θi,供热) 。

盘管辐射系统

  • 增加了分集水器在图中水平放置或倒置（回路出口向上放置）的选项，这可在参数表通过新增的控制选项方向 来设置。
  • 在一般参数 窗口的其它选项 中增加了特定市场选项 - 允许不考虑供热/供冷面 因另一侧的冷热输出所需的流量。

辐射板系统

  • 在墙面辐射板/毛细管/顶面辐射板/毛细管网的参数表窗口中 - 增加了Δp最大 ，以控制单个辐射板或串联辐射板组的最大允许压差。

给水系统

  • 新增了给水系统设计模块 - 取决于软件包的配置

在帮助系统中的文章:

14.2 版更新

  • 统一了不同语言版本中可用的中性产品数据库的数量和内容，这将有助于在不同版本之间项目的转换。

14.1 版的更新

  • 本次更新功能上无明显变化。

在帮助系统中的文章:

14.0 版更新

模块:

基本模块

  • 增加了一个新的PDF文本打印输出的功能。如果系统中安装了适当的驱动程序，程序将使用它并直接在打印模块的工具栏中提供打印成PDF文件 的按钮。
  • 在参数表 窗口的参数域旋转角度 中，增加了可以声明配件（阀门、过滤器等）相对于管道轴线（旋转）的角度。
  • 增加了建筑外轮廓 部件新的（单独的）样式和标签。
  • 在管路 参数表中，增加了新的参数输入域与地面的距离（在楼层参数中设置） 。使得控制管网的标高更加容易，并允许通过复制将其安装到其它楼层。
  • 3D视图 的图形样式更吸引人，包括建筑结构部件。

盘管辐射系统

  • 增加了考虑各区供热要求的供水温度(θ供,供热 辐射) 的图形最佳化 。该功能位于一般参数 窗口的源 中，在第一次计算之后就会出现。
  • 给分集水器设置表 增加了新的模板。
  • 在一般参数 窗口的地面系统 中，增加了一个新的参数输入域系统构造板 ，允许指定省缺的系统绝热版。

热损失

  • 改进了完全位于地面以下、且与地面接壤的墙内所安装的窗户上方的墙的面积的算法。

在帮助系统中的文章:

13.3 版更新

模块:

基本模块

  • 改进了坡屋顶整形的算法

13.2 版更新

  • 本次更新功能上无明显变化。

13.1 版更新

模块:

基本模块

  • 重新布置了建筑 工具标签

盘管辐射系统

  • 改进了交互式辐射系统计算 的结构和布局

13.0 版更新

模块:

基本模块

  • 可以将结果中的表头锁定，以便滚动表格时让其始终保持可见

热损失

  • 可将具有定义了U值的围护结构指定给相同类型的建筑围护结构，而不管其厚度如何

盘管辐射系统

  • 地面供暖/供冷系统的引线管可以铺设在绝热层内（回填层供热/供冷盘管之下）
  • 可以改变混水装置/泵站 的方向(垂直或水平)
  • 为部件混水装置/泵站 增加了新的标签
  • 混水 / 控制装置图表
  • 改进了确定辐射系统供水温度的算法
  • 改进了将供热/供冷区 分割为供热/供冷面 的算法
  • 层流的诊断

供热系统 和 供冷系统

  • 对于末端装置 提供了更多的连接方式

12.2 版更新

模块:

InstalSystem 基础包和软件包管理器

  • 自动保存功能的改进

供冷系统

  • 供冷系统模块的实施 - 取决于软件版本

12.1 版更新

  • 本次更新功能上无明显变化

12.0 版更新

模块:

InstalSystem 基础包和软件包管理器

  • 改进了 捕捉 模式
  • 增加了图形显卡的诊断

散热器规格选择

  • 增加了通过在参数表 中对人工选择的散热器的输出值的显示

辐射板系统

  • 改进了分集水器设置表 的可读性
  • 改进了串联辐射板组温降的算法

11.0 版更新

模块:

InstalSystem 基础包和软件包管理器

  • 改进了自动生成墙、楼板和屋顶 的功能
  • 改进了缩放比例和预览比例尺
  • 改进了关于建筑结构中的错误的诊断
  • 在结果表中增加了其它信息
  • 图纸规格 部件与打印页面 部件进行了整合

盘管辐射系统

  • 改进了由引线管加热 虚拟连接的地面类型热输出计算的算法
  • 改进了自动插入到带有楼板开洞的房间中的供热/供冷地面的算法

供热系统

  • 改进了带内置阀门的散热器与分配管路根据阀门形状（直型、角型）和连接方向（从地板、从墙壁）的自动连接

辐射板系统

  • 改进了串联辐射板流量的计算

9.2 版更新

  • 本次发布功能上无明显变化

9.1 版更新

  • 本次发布功能上无明显变化

9.0 版更新

模块:

InstalSystem InstalSystem 基础包和软件包管理器'

  • 增加了多扇门或多扇窗的设置
  • 增加了参考点 的外观设置
  • 增加了楼板开洞 可自动捕捉CAD图形关键点的功能

盘管辐射系统

  • 改进了多层建筑带有楼板开洞房间插入供热地面 的算法
  • 改进了在门/窗区分割供热墙面 的算法

热损失(热负荷)

  • 增加了对有关图形隔断(墙、天花板和屋顶)厚度公差 的定义，并可指定给围护结构定义

辐射板系统

  • 改进了串联辐射板最佳温差(Δθ)水平的确定
  • 辐射板的最大安装高度增加到了30米
  • 对于辐射板的提示和辐射板的标签增加了流量信息

8.0 版更新

模块:

InstalSystem 基础包和软件包管理器

  • 当启动隔断生成器 - 根据房间内轮廓和建筑外轮廓生成墙和楼板 算法时，改进了不完整数据的诊断
  • 房间标签 - 增加了显示说明 区域的能力
  • 增加了创建省缺房间类型(带有其参数和数据)的能力
  • 增加了部件插入时的外观配置
  • 改进了图形元素数据填充的人机工程学

热损失(热负荷)

  • 修正了对于带有指定U值 （ 传热系数 ） 的围护结构 的无厚度的围护结构定义 的警告错误的诊断


7.3 版更新

  • 本次更新发布功能上无明显变化。

7.2 版更新

模块：

InstalSystem 基础包和软件包管理器

  • 对于不正确的或不完整的建筑结构参数增加了全新的诊断信息。
  • 当所定义的维护结构其厚度为零时的诊断信息级别降至警告或提示（当该定义未处于省缺状态时)。

辐射板系统

  • 增加了"顶面辐射板的铺装区域" 工具。

6.1 版更新

模块:

InstalSystem 基本模块和软件包管理器

  • 增加了 A0 和 A1 图纸到打印输出页面。
  • 改进了自动和定向线模式。

散热器设计

  • 增加了在散热器标签上显示阀门设置的选项
  • 在一般参数中增加了散热器与墙的省缺距离的定义
  • 增加了散热器固定件是否在设计图中显示的选项

辐射回路系统

  • 增加了辐射系统供水温度最佳化的不同准则，完善了算法
  • 改进了自动分割供热/供冷区到供热/供冷面的算法
  • 改进了辐射供热/供冷回路自动绘图的算法

在帮助系统中的文章：

5.1 版更新

  • 本次更新功能上无明显变化。

5.0 版更新

模块:

InstalSystem 基本模块和软件包管理器

  • 增加了尺寸线。

辐射盘管系统

  • 改进了供热/供冷区自动分割的算法
  • 改进了辐射供暖供冷回路3D视图显示的效果
  • 扩展了引线管路径的功能，增加了在给定的引线管路径宽度范围内自动计算管间距和绘制引线管的功能

在帮助系统中的文章:

4.0 版更新

模块:

辐射盘管系统

  • 改进了辐射供暖供冷回路绘制的算法

辐射板系统

  • 增加了顶面辐射板铺设区域的工具 - 可自动布置顶面辐射板

在帮助系统中的文章:

2.2 版更新

模块:

InstalSystem 基本模块和软件包管理器

  • 增加了保存为只读文件的选项
  • 增加了3D视图打印

在帮助系统中的文章:

2.1 版更新

  • 本次更新功能上无明显变化。

2.0 版更新

模块的初始范围:

  • InstalSystem 基本模块和软件包管理器
  • 热损失(热负荷)
  • 散热器计算
  • 辐射盘管系统
  • 辐射板系统
  • 干式辐射盘管系统
  • 供热系统
  • 辐射供冷系统
  • gbXML (BIM) 接口

信息材料的原始状态

取自“https://cn.help.instalsoft.com/index.php?title=InstalSystem_5_版本发布说明&oldid=14809”