降低热水温度的三通混水阀

产品	InstalSystem 5
文章类型	FUNCTION AND TOOL
版本的最新内容	2022-03-16 {{{version2}}} {{{version3}}} {{{version4}}}

Description

混水阀 for hot utility water mixes hot water with cold water to reduce the maximum temperature of water at outlet points (in relation to the value provided by 水源). The temperature of the mixed water is indicated in the valve data table, and the program calculates the flow rates of hot and cold water required to obtain that temperature.
This valve is used most often in designs that include 给水系统计算 in such facilities as hospitals, kindergartens, nursing homes, etc.

Location in program

• The 混水阀 is available in the 水力分配 - 给水系统 section on the 主工具 bar when 给水系统 editing scope is activated.
  

  

  1. 混水阀

  
  

Examples of use

Placing the component

混水阀 is an autonomous component. It should be placed at the required spot in the design, and then in the 参数表 window the following should be specified:

• 类型 - it is not possible to declare a default type of the 混水阀, 类型 should be specified in the 参数表 after the component is placed in the design
• 混水后的温度 θ_hw,m
• 与地面的距离（在楼层参数中设置）
• 方向.
  

  

  2. 混水阀 - 参数表

  
  

Connecting the component

• Connect the 混水阀 to the system. To draw pipe-runs carrying water of reduced temperature use 管路 热水.
• Upon connecting the component to the system, the program calculates the flow rates of hot and cold water to obtain the required 混水后的温度, specified in the 参数表 for the 混水阀.

Additional information

• It is not possible to connect a circulation arrangement to the system part supplied via a 混水阀.
• All 混水阀 components present in a design are enumerated in the 阀门和配件清单
• Incorrect connection to a system is indicated by the error message: 部件反向连接 (%s)