如何绘制带天井的建筑

产品	InstalSystem 5
文章类型	提示和技巧
版本的最新内容	2022-06-24

Problem description

In InstalSystem 5 there are several ways to design a building with a patio, allowing for optimal adaptation to the method of creating the building structure chosen in the project. Steps leading to create a building with a patio are described in detail further on in this article.

Solution

Using the 房间 and 建筑外轮廓 components

Information on creating the building structure with the use of 房间 手动 and 建筑外轮廓 components is provided in the article: Preparation of building structure - Rooms layout.

Method 1: using a closed C-shaped 房间 component

1. Insert a closed C-shaped 房间 surrounding an interior patio in a building so that the edges of the room do not overlap.
   

   

   1. Closed C-shaped 房间.

   
   
2. Add a 建筑外轮廓 component to the design.
3. In order to verify whether the edges of the 房间 do not overlap, launch 建筑结构计算.
4. Insert a 房间 手动 component to cover the area of the patio in the building.
5. Launch 自动生成墙、楼板和屋顶.
6. Remove the 墙 component left over after the manual C-shaped room.
7. Over the patio area cut out an 屋顶开洞 and connect it using any two edges with the outer edge of the 屋顶.
8. Optionally cut out an 楼板开洞 that covers the patio area.
9. Run 建筑结构计算 again.
   
   
   

Method 2: outline the patio using manually placed walls

1. Insert a 房间.
2. Add a 建筑外轮廓 component to the design.
3. Launch 自动生成墙、楼板和屋顶.
4. Launch 建筑结构计算.
5. Using the 墙 components, draw the patio into the existing 房间 and launch 建筑结构计算 again.
6. Over the patio area cut out an 屋顶开洞 and connect it using any two edges with the outer edge of the 屋顶.
7. Optionally cut out an 楼板开洞 that covers the patio area.
8. Run 建筑结构计算 again.
   
   
   

Using manually drawn walls

Information on creating a building structure using the 墙, 屋顶 and 楼板 components is provided in the article: Preparation of building structure - Complete building structure.

1. Outline the shape of the room and patio using the 墙 components.
2. Add 屋顶 and 楼板 components to the design.
3. Launch 建筑结构计算.
4. Over the patio area cut out an 屋顶开洞 and connect it using any two edges with the outer edge of the 屋顶.
5. Optionally cut out an 楼板开洞 that covers the patio area.
6. Run 建筑结构计算 again.
   
   
   

• Attention! It is also possible to leave an empty space above the patio and draw a 屋顶 in the form of two perfectly abutting roof slopes.
  

  

  2. Roof slopes in a building with a patio.