基于InstalSystem 4 项目文件的设计
说明
本文介绍了如何利用InstalSystem 5 软件
- 打开InstalSystem 4 项目文件(ISB 格式)，以及
- 解决打开文件过程中所遇到问题。
在程序中位置
在InstalSystem 5程序中打开InstalSystem 4 项目文件会受到InstalSystem 5 Manager 以及InstalSystem 5 编辑器 中的打开文件 功能的影响。
应用举例
打开一个ISB格式文件项目
程序总是以InstalSystem 5 最新安装的版本打开一个ISB项目文件。
导入参数和部件的范围
- 导入InstalSystem 5所支持的参数和部件的范围。
- 一般参数 - 每个参数会被传送到InstalSystem 5 相应的参数域中。
- 建筑部件：楼层、墙、地板和有关部件（窗、门、墙洞）、房间、等。
- 系统部件：供热面、分集水器、管线、引线管、远程连接、源、管件、立管、混水装置、阀门、散热器、自定义末端装置、膨胀缝等。
- 部件参数转换到InstalSystem 5 相应的部件参数中。
- 建筑热负荷计算所需的部件参数，包括：
- 标准和计算选项，
- 维护结构的定义，
- 建筑和建筑单元的一般参数，
- 房间参数（通风参数、采暖/非采暖、设计温度），
- 描述性的部件和打印输出部件：标签、表格等。
- 不能导入到InstalSystem 5 中的参数和部件：
- “轴测图”或“示意图”类型的工作表，
- 在InstalSystem 5 中无法显示的部件的参数域，
- 由扫描合并 生成的底图(基础图)，
- 部件：3通阀；4通阀；2个阀一个泵组成的混水装置，
- 逻辑维护结构（表格和图形），
- 应用和计算范围不支持的系统部件，
- 在“轴测图”类型的工作表中所创建的部件。
Verification of diagnostic messages after opening a file
- Verification of diagnostics on unsupported calculation scopes.
1. Unsupported calculation scopes - Verification of diagnostics on missing catalogues.
2. Missing catalogues - Verification of diagnostics on data and components not imported.
3. Data and components not imported - Verification of diagnostics on imported unsupported data and components.
4. Unsupported data and components
Verification of data and components after open file
Some data have a 
status, indicating that the value is set.
- Verification in the 一般参数 window, in particular:
- 项目信息,
- enabled expected 计算范围,
- 目录 used in the project,
- Selected components from 水力分配系统:
- 默认类型和参数,
- 管材和绝热材料设计选项.
- 辐射系统:
- 地面系统.
- Verification of building structure.
- existence of building structure components: storeys, rooms, walls, horizontal partitions, windows, doors,
- wall parameters (thickness) and window/door parameters (dimensions) in relation to source file,
- verification using 3D视图 and in 一般参数 / 楼层管理:
- proper mutual orientation of storeys,
- proper display of associated components (windows, doors) and location thereof as in source file,
- areas occupied by rooms are identical with those in source file,
- rooms do not match,
- multi-storey rooms are as expected.
- Verification of service systems.
- heating surfaces - automatically converted into 供热/供冷区,
- manifolds - 分集水器配件 is set to 其它,
- pipe-runs and feed pipes,
- mixers - withdrawal of mixer of the 2 valves, pumps on mixer creates discontinuities in the system,
- units of set flow resistance,
- 远程连接 - lack of support of Developed view creates discontinuities in the system,
- stacks,
- sources.
- Verification of component appearance.
- graphical style,
- appearance and contents of labels.
Verification of data after opening file with data for calculating thermal load of building
- Verification of building structure.
- Verification of room data.
- verify in 热负荷计算 accordance of room data with source file:
- Type,
- Symbol,
- Method of calculating Phi,
- Theta_i,H,
- Status: heated/not heated,
- assignment to 建筑单元,
- data in frame 通风耗热量
- verify in 热负荷计算 accordance of room data with source file:
- Verification of logical partitions.
- rooms have logical partitions - verify in 热负荷计算 and in 项目浏览器 within the 热负荷计算 scope.
- Verification of partition data.
- verify in 项目浏览器 within the 热负荷计算 scope the existence of partition definitions - cooling partitions InstalSystem 4 with properties specified directly in the room table (with no definition applied) automatically generate in InstalSystem 5 appropriate definitions.
Appending data and components after open file
After verifying diagnostic messages, data and components, to continue working with InstalSystem 5 it may be necessary to:
- append and adjust remote connections due to lack of imported worksheets of the Developed view type,
- append service systems with unimported components that are necessary to continue working with the project,
- replace components that are not imported with equivalent components available in InstalSystem 5,
- append the building structure with missing components,
- launch 建筑结构计算 to generate logical partitions required for 建筑热负荷计算,
- reinstate lost assignments of partition definitions to logical partitions.