查看和打印计算结果

来自HelpSystem
跳转到导航 跳转到搜索

说明

本文以如下表格和图形的形式描述了项目的计算结果：

  • 查看和处理诊断消息，
  • 查看计算结果提示，
  • 查看表中的计算结果，
  • 准备要打印的计算结果表格部分，
  • 准备要打印的计算结果图形部分。

程序中的位置

查看和处理诊断信息

  • 查看和处理诊断信息需打开诊断 窗口。
    1. 诊断

查看表格中的计算结果

  • 查看表格中的计算结果需打开结果 窗口。
    2. 结果

打印项目计算书和图形

  • 打印项目计算书和图形需打开打印输出 窗口。
    3. 打印输出

应用举例

查看和处理诊断信息

  • 信息级别:
    • 错误 - 这是最重要的信息。在项目设计期间所发生的所有错误，都必须清除，否则结果将不完整。有两种类型的错误，一是致命错误，它将导致停止计算；二是一般错误，它虽然不会中断计算，但可能导致结果不可靠。
    • 警告 - 比错误低一级的信息。警告不会停止计算或显示结果。警告通常与可能不正确的参数或结果有关，应始终检查警告信息。
    • 提示 - 对一些参数或结果的提示或提请注意的信息。像警告一样，提示不会阻止计算和显示结果。
  • Diagnostic window tabs.
    These group messages from a selected range of calculations and provide information on the levels of messages that have occurred during calculations of the selected range.
    4. Diagnostic window tabs

  • Message filtering.
    Enables turning off complete levels of messages. Very useful for systematizing the handling of diagnostic messages.

  • Message grouping for selected components.
    This function enables gathering all diagnostic messages that apply to a selected component in the project and eliminating them at once in a single data editing operation.

  • Selective marking of components to which a message applies.
    Marking of individual components may be effected by left double clicking the message or by selecting from a list of components to which a collective message applies.

  • Group marking of components to which a message applies.
    Marking of multiple components may be effected by left double clicking the message or by selecting the 标出所有发生错误的部件 function in the menu.

  • Extended information on diagnostic messages.
    • Diagnostic messages that require wider explanation in order to eliminate them may refer to the extended HelpSystem. It can be accessed by clicking the button at the end of the message line.

    • Selected diagnostic messages in the 说明 column indicate to which specific fields in the 参数表 or in dedicated editors the diagnosed values apply.
      5. Extended information on diagnostic messages

Presentation of calculation results of a project that has a Not Calculated status

  • The invalid or not calculated status of a project is indicated by a warning symbol displayed on the status bar.
    6. Project not calculated - status bar

  • Invalid or not calculated results are indicated by:
    • crossed out values in labels,
    • question marks in hints,
    • appropriate messages on invalid calculation results:
      • 注：本项目尚未计算或数据自上次计算后已更改。
      • 注意！项目数据已被更改还未计算更新，打印输出可能过时，请先重新计算。
        7. Project not calculated

Viewing calculation results as hints

  • The program enables convenient viewing of component data and calculation results in the form of hints. To display a hint with component data and results, position the mouse cursor over the component and wait for a moment. For some components, e.g. a radiator with integrated valve or a manifold with a manifold set, hints of differing content can be displayed depending on the place the cursor is positioned. When the cursor is positioned over a junction (point of connection of pipe-runs), the hint contains information on the manner of constructing the junction (selected and sized pipe fittings and accessories) using components available in catalogs.

Viewing calculation results in tables

  • Tabular calculation results are presented in a tree structure divided into sections. The number and contents of a section corresponds to the scope(s) of the project and the result sought should be looked for in the appropriate section. Result viewing is facilitated by a number of display control functions: view single pages, view multiple pages, navigate using miniatures. Tables of results can have their headings hidden, and bills of materials can be displayed with additional graphical and descriptive information on the products.
    更多信息，见： Using catalogs and catalogs data in the project

Preparing tabular part of calculation results for printing

  • It is possible to print:
    • a setup (composition) (predefined or user-defined) - from within the 打印输出 module.

    • a single table - from within the 结果 module.
      The Print operation can be launched for the individual sections in the tree in the calculation results viewing window.

Preparing graphic part of calculation results for printing

取自“https://cn.help.instalsoft.com/index.php?title=查看和打印计算结果&oldid=3759”