带回水温度限制器的地面辐射采暖

来自HelpSystem
Dyst CN（讨论 | 贡献）2022年12月31日 (六) 05:36的版本 （→‎说明）

跳转到导航 跳转到搜索


产品 InstalSystem 5
文章类型 FUNCTION AND TOOL
版本的最新内容 2022-06-07


说明

当使用 InstalSystem 5 设计由高温管网供水的地面辐射采暖时，可以使用如下类型的地面供热/供冷区 部件：

  • 带有回水温度限制器
  • 带有回水温度限制器，来自散热器回水.

上述的地面供热/供冷区 类型不能自动分割，且仅能由一个供热/供冷面 ，即一个回路组成。

Location in the program

  • 地面 icons are available in the 2D Editor window on the 主工具 bar, section 辐射 with the 地面/墙面辐射 editing scope enabled.
    1. 供热/供冷区.

  • The type of the used 供热/供冷区 component can be selected in the 参数表 window, 供热/供冷区类型 field.
    2. 供热/供冷区: 带有回水温度限制器 and 带有回水温度限制器，来自散热器回水.

Example of use

Editing and setting the parameters

Inserting a component and selecting the functional type

Operating parameters

Structural parameters

Peripheral zones

Calculations

  • For the 地面供热/供冷区 带有回水温度限制器 and 带有回水温度限制器，来自散热器回水 components it is possible to change the determined value of 管间距 in the 交互式辐射系统计算 window.
    更多信息，见： Interactive calculations of radiant systems.

Heating/cooling floor zone with return temperature limiter

  • The 地面供热/供冷区 带有回水温度限制器 component should be connected by means of 管路 components to a high-parameter central heating system, supplying the 散热器 components and other 对流 units, connected to a 源 used for 供热. On the return pipe-run of the 地面供热/供冷区 a 阀门 of the Return temperature limiter type should be installed.

  • For the 地面供热/供冷区 带有回水温度限制器, the enabled option 未绘制图形连接时，创建假想的连接 in the 假想的辐射系统连接 tab in the 一般参数 window is ignored.

Heating/cooling floor zone with return temperature limiter fed from radiator return

  • The 地面供热/供冷区 带有回水温度限制器，来自散热器回水 component should be connected to a high-parameter central heating network, supplying the 散热器 components and other 对流 units, connected to a 源 used for 供热 in the following way:
    • 供 for the 地面供热/供冷区 - using a 管路 of the 串联连接 type connected to the return line of a 散热器.
      Attention! 管路 of the 串联连接 type must run outside of the 地面供热/供冷区 area and must be connected to its edge from the outside. In most systems the 散热器 is positioned directly above the 地面供热/供冷区 and the simplest connection "from the inside of the room" is not handled by the program as yet.
    • 回 - using a 管路 of the 回 type, by connecting it directly to the return line from the radiators and other convection units. The return pipe-run from the 地面供热/供冷区 should be provided with a 阀门 of the Return temperature limiter type.

  • For the 地面供热/供冷区 带有回水温度限制器，来自散热器回水' the enabled option 未绘制图形连接时，创建假想的连接 in the 假想的辐射系统连接 tab in the 一般参数 window is ignored.


取自“https://cn.help.instalsoft.com/index.php?title=带回水温度限制器的地面辐射采暖&oldid=25237”