基于InstalSystem 4 项目文件的设计

说明

本文介绍了如何利用InstalSystem 5 软件

• 打开InstalSystem 4 项目文件(ISB 格式)，以及
• 解决打开文件过程中所遇到问题。

在程序中位置

在InstalSystem 5程序中打开InstalSystem 4 项目文件会受到InstalSystem 5 Manager 以及InstalSystem 5 编辑器 中的打开文件 功能的影响。

应用举例

打开一个ISB格式文件项目

程序总是以InstalSystem 5 最新安装的版本打开一个ISB项目文件。

导入参数和部件的范围

• 可导入到InstalSystem 5的参数和部件的范围：
  • 一般参数 - 每个参数会被传送到InstalSystem 5 相应的参数域中。
  • 建筑部件：楼层、墙、地板和有关部件（窗、门、墙洞）、房间、等。
  • 系统部件：供热面、分集水器、管线、引线管、远程连接、源、管件、立管、混水装置、阀门、散热器、自定义末端装置、膨胀缝等。
  • 部件参数转换到InstalSystem 5 相应的部件参数中。
  • 建筑热负荷计算所需的部件参数，包括：
    • 标准和计算选项，
    • 维护结构的定义，
    • 建筑和建筑单元的一般参数，
    • 房间参数（通风参数、采暖/非采暖、设计温度）。
  • 描述性的部件和打印输出部件：标签、表格等。
• 不能导入到InstalSystem 5 中的参数和部件：
  • “轴测图”或“示意图”类型的工作表，
  • 在InstalSystem 5 中无法显示的部件的参数域，
  • 由扫描合并 生成的底图(基础图)，
  • 部件：3通阀；4通阀；2个阀一个泵组成的混水装置，
  • 逻辑维护结构（表格和图形），
  • 应用和计算范围不支持的系统部件，
  • 在“轴测图”类型的工作表中所创建的部件。

Verification of diagnostic messages after opening a file

• Verification of diagnostics on unsupported calculation scopes.
  

  

  1. Unsupported calculation scopes

  
  
• Verification of diagnostics on missing catalogues.
  

  

  2. Missing catalogues

  
  
• Verification of diagnostics on data and components not imported.
  

  

  3. Data and components not imported

  
  
• Verification of diagnostics on imported unsupported data and components.
  

  

  4. Unsupported data and components

  
  

Verification of data and components after open file

Some data have a status, indicating that the value is set.

• Verification in the 一般参数 window, in particular:
  • 项目信息,
  • enabled expected 计算范围,
  • 目录 used in the project,
  • Selected components from 水力分配系统:
    • 默认类型和参数,
    • 管材和绝热材料设计选项.
  • 辐射系统:
    • 地面系统.
• Verification of building structure.
  • existence of building structure components: storeys, rooms, walls, horizontal partitions, windows, doors,
  • wall parameters (thickness) and window/door parameters (dimensions) in relation to source file,
  • verification using 3D视图 and in 一般参数 / 楼层管理:
    • proper mutual orientation of storeys,
    • proper display of associated components (windows, doors) and location thereof as in source file,
    • areas occupied by rooms are identical with those in source file,
    • rooms do not match,
    • multi-storey rooms are as expected.
• Verification of service systems.
  • heating surfaces - automatically converted into 供热/供冷区,
  • manifolds - 分集水器配件 is set to 其它,
  • pipe-runs and feed pipes,
  • mixers - withdrawal of mixer of the 2 valves, pumps on mixer creates discontinuities in the system,
  • units of set flow resistance,
  • 远程连接 - lack of support of Developed view creates discontinuities in the system,
  • stacks,
  • sources.
• Verification of component appearance.
  • graphical style,
  • appearance and contents of labels.

Verification of data after opening file with data for calculating thermal load of building

• Verification of building structure.
• Verification of room data.
  • verify in 热负荷计算 accordance of room data with source file:
    • Type,
    • Symbol,
    • Method of calculating Phi,
    • Theta_i,H,
    • Status: heated/not heated,
    • assignment to 建筑单元,
    • data in frame 通风耗热量
• Verification of logical partitions.
  • rooms have logical partitions - verify in 热负荷计算 and in 项目浏览器 within the 热负荷计算 scope.
• Verification of partition data.
  • verify in 项目浏览器 within the 热负荷计算 scope the existence of partition definitions - cooling partitions InstalSystem 4 with properties specified directly in the room table (with no definition applied) automatically generate in InstalSystem 5 appropriate definitions.

Appending data and components after open file

After verifying diagnostic messages, data and components, to continue working with InstalSystem 5 it may be necessary to:

• append and adjust remote connections due to lack of imported worksheets of the Developed view type,
• append service systems with unimported components that are necessary to continue working with the project,
• replace components that are not imported with equivalent components available in InstalSystem 5,
• append the building structure with missing components,
• launch 建筑结构计算 to generate logical partitions required for 建筑热负荷计算,
• reinstate lost assignments of partition definitions to logical partitions.