基于InstalSystem 4 项目文件的设计：修订间差异

2017年11月25日 (六) 10:47的版本

说明

本文介绍了如何利用InstalSystem 5 软件

打开InstalSystem 4 项目文件(ISB 格式)，以及
解决打开文件过程中所遇到问题。

在程序中位置

在InstalSystem 5程序中打开InstalSystem 4 项目文件会受到InstalSystem 5 Manager 以及InstalSystem 5 编辑器 中的打开文件 功能的影响。

应用举例

打开一个ISB格式文件项目

程序总是以InstalSystem 5 最新安装的版本打开一个ISB项目文件。

导入参数和部件的范围

导入InstalSystem 5所支持的参数和部件的范围。
- 一般参数 - 每个参数会被传送到InstalSystem 5 相应的参数域中。
- 建筑部件：楼层、墙、地板和有关部件（窗、门、墙洞）、房间、等。
- 系统部件：供热面、分集水器、管线、引线管、远程连接、源、管件、立管、混水装置、阀门、散热器、自定义末端装置、膨胀缝等。
- 部件参数转换到InstalSystem 5 相应的部件参数中。
- 建筑热负荷计算所需的部件参数，包括：
  - 标准和计算选项，
  - 维护结构的定义，
  - 建筑和建筑单元的一般参数，
  - 房间参数（通风参数、采暖/非采暖、设计温度），
- 描述性的部件和打印输出部件：标签、表格等。
不能导入到InstalSystem 5 中的参数和部件：
- “轴测图”或“示意图”类型的工作表，
- 在InstalSystem 5 中无法显示的部件的参数域，
- 由扫描合并 生成的底图(基础图)，
- 部件：3通阀；4通阀；2个阀一个泵组成的混水装置，
- 逻辑维护结构（表格和图形），
- 应用和计算范围不支持的系统部件，
- 在“轴测图”类型的工作表中所创建的部件。

Verification of diagnostic messages after opening a file

Verification of diagnostics on unsupported calculation scopes.
1. Unsupported calculation scopes
Verification of diagnostics on missing catalogues.
2. Missing catalogues
Verification of diagnostics on data and components not imported.
3. Data and components not imported
Verification of diagnostics on imported unsupported data and components.
4. Unsupported data and components

Verification of data and components after open file

Some data have a status, indicating that the value is set.

Verification in the 一般参数 window, in particular:
- 项目信息,
- enabled expected 计算范围,
- 目录 used in the project,
- Selected components from 水力分配系统:
  - 默认类型和参数,
  - 管材和绝热材料设计选项.
- 辐射系统:
  - 地面系统.
Verification of building structure.
- existence of building structure components: storeys, rooms, walls, horizontal partitions, windows, doors,
- wall parameters (thickness) and window/door parameters (dimensions) in relation to source file,
- verification using 3D视图 and in 一般参数 / 楼层管理:
  - proper mutual orientation of storeys,
  - proper display of associated components (windows, doors) and location thereof as in source file,
  - areas occupied by rooms are identical with those in source file,
  - rooms do not match,
  - multi-storey rooms are as expected.
Verification of service systems.
- heating surfaces - automatically converted into 供热/供冷区,
- manifolds - 分集水器配件 is set to 其它,
- pipe-runs and feed pipes,
- mixers - withdrawal of mixer of the 2 valves, pumps on mixer creates discontinuities in the system,
- units of set flow resistance,
- 远程连接 - lack of support of Developed view creates discontinuities in the system,
- stacks,
- sources.
Verification of component appearance.
- graphical style,
- appearance and contents of labels.

Verification of data after opening file with data for calculating thermal load of building

Verification of building structure.
Verification of room data.
- verify in 热负荷计算 accordance of room data with source file:
  - Type,
  - Symbol,
  - Method of calculating Phi,
  - Theta_i,H,
  - Status: heated/not heated,
  - assignment to 建筑单元,
  - data in frame 通风耗热量
Verification of logical partitions.
- rooms have logical partitions - verify in 热负荷计算 and in 项目浏览器 within the 热负荷计算 scope.
Verification of partition data.
- verify in 项目浏览器 within the 热负荷计算 scope the existence of partition definitions - cooling partitions InstalSystem 4 with properties specified directly in the room table (with no definition applied) automatically generate in InstalSystem 5 appropriate definitions.

Appending data and components after open file

After verifying diagnostic messages, data and components, to continue working with InstalSystem 5 it may be necessary to:

append and adjust remote connections due to lack of imported worksheets of the Developed view type,
append service systems with unimported components that are necessary to continue working with the project,
replace components that are not imported with equivalent components available in InstalSystem 5,
append the building structure with missing components,
launch 建筑结构计算 to generate logical partitions required for 建筑热负荷计算,
reinstate lost assignments of partition definitions to logical partitions.

@@ 第7行： / 第7行： @@
 在'''InstalSystem 5'''程序中打开'''InstalSystem 4''' 项目文件会受到'''InstalSystem 5 Manager''' 以及'''InstalSystem 5 编辑器''' 中的''<IS_TS id=OpenFile/>'' 功能的影响。
-==Example of use==
+==应用举例==
-===Opening an ISB format project===
+===打开一个ISB格式文件项目===
-The program always opens an ISB project file in the most recent installed version of '''InstalSystem 5'''.
+程序总是以'''InstalSystem 5''' 最新安装的版本打开一个ISB项目文件。
-===Range of imported data and components===
+===导入参数和部件的范围===
-* Range of imported data and components supported by '''InstalSystem 5'''.
+* 导入'''InstalSystem 5'''所支持的参数和部件的范围。
-**'''''<IS_TS id=rsDanogi/>''''' - the individual data are transferred to corresponding fields in '''InstalSystem 5''',
+**'''''<IS_TS id=rsDanogi/>''''' - 每个参数会被传送到'''InstalSystem 5''' 相应的参数域中。
-** building structure components: storeys, walls, floors and related components (window, door, opening in wall), rooms, etc.,
+** 建筑部件：楼层、墙、地板和有关部件（窗、门、墙洞）、房间、等。
-** system components: heating surfaces, manifolds, pipe-runs, pipe feeds, remote connections, sources, fittings, stacks, mixers, valves, radiators, units of specified flow resistance, expansion joints, etc.,
+** 系统部件：供热面、分集水器、管线、引线管、远程连接、源、管件、立管、混水装置、阀门、散热器、自定义末端装置、膨胀缝等。
-** component data converted into corresponding component data in '''InstalSystem 5''',
+** 部件参数转换到'''InstalSystem 5''' 相应的部件参数中。
-** component data required for thermal calculations of the building, including:
+** 建筑热负荷计算所需的部件参数，包括：
-*** standards and calculation options,
+*** 标准和计算选项，
-*** definitions of thermal partitions (partition structures),
+*** 维护结构的定义，
-*** general data of the building and of the building units,
+*** 建筑和建筑单元的一般参数，
-*** room data (ventilation parameters, heated/non-heated, design temperature),
+*** 房间参数（通风参数、采暖/非采暖、设计温度），
-** descriptive components and printout components: labels, tables, etc.
+** 描述性的部件和打印输出部件：标签、表格等。
-* Data and components not imported to '''InstalSystem 5'''.
+* 不能导入到'''InstalSystem 5''' 中的参数和部件：
-** worksheets of the ''Developed view'' type,
+** “轴测图”或“示意图”类型的工作表，
-** data fields of components not present in '''InstalSystem 5''',
+** 在'''InstalSystem 5''' 中无法显示的部件的参数域，
-** underlays (base drawings) generated by '''''<IS_TS id=sAppsTitle/>''''',
+** 由'''''<IS_TS id=sAppsTitle/>''''' 生成的底图(基础图)，
-** components: 3-way valve; 4-way valve; mixer of the type ''2 valves, pump on mixer'',
+** 部件：3通阀；4通阀；2个阀一个泵组成的混水装置，
-** logical partitions (tabular and graphical),
+** 逻辑维护结构（表格和图形），
-** system components within unsupported calculation scopes and applications,
+** 应用和计算范围不支持的系统部件，
-** components created in a worksheet of the ''Developed view'' type.
+** 在“轴测图”类型的工作表中所创建的部件。
 ===Verification of diagnostic messages after opening a file===