如何绘制带天井的建筑：修订间差异

来自HelpSystem
跳转到导航 跳转到搜索
（建立内容为“<!-- case 226399 --> <IS_HELP id="HS134"/> {{Article table |commercial_product1=InstalSystem 5 |p2 =<!--gdy jest kolejny produkt handlowy, zamieni…”的新页面）
 
第18行： 第18行：
}}
}}


==Problem description==
==问题说明==
In '''InstalSystem 5''' there are several ways to design a building with a patio, allowing for optimal adaptation to the method of creating the building structure chosen in the project. Steps leading to create a building with a patio are described in detail further on in this article.
在'''InstalSystem 5''' 中，有几种设计带有天井的建筑的方法，从而可以最佳地适应创建此类的建筑结构。本文将进一步详细介绍创建带天井的建筑的步骤。


==Solution==
==Solution==

2022年7月29日 (五) 02:08的版本


产品 InstalSystem 5
文章类型 提示和技巧
版本的最新内容 2022-06-24


问题说明

在InstalSystem 5 中，有几种设计带有天井的建筑的方法，从而可以最佳地适应创建此类的建筑结构。本文将进一步详细介绍创建带天井的建筑的步骤。

Solution

Using the 房间 and 建筑外轮廓 components

Information on creating the building structure with the use of 房间 手动 and 建筑外轮廓 components is provided in the article: Preparation of building structure - Rooms layout.


Method 1: using a closed C-shaped 房间 component

  1. Insert a closed C-shaped 房间 surrounding an interior patio in a building so that the edges of the room do not overlap.
    1. Closed C-shaped 房间.

  2. Add a 建筑外轮廓 component to the design.
  3. In order to verify whether the edges of the 房间 do not overlap, launch 建筑结构计算.
  4. Insert a 房间 手动 component to cover the area of the patio in the building.
  5. Launch 自动生成墙、楼板和屋顶.
  6. Remove the 墙 component left over after the manual C-shaped room.
  7. Over the patio area cut out an 屋顶开洞 and connect it using any two edges with the outer edge of the 屋顶.
  8. Optionally cut out an 楼板开洞 that covers the patio area.
  9. Run 建筑结构计算 again.

Method 2: outline the patio using manually placed walls

  1. Insert a 房间.
  2. Add a 建筑外轮廓 component to the design.
  3. Launch 自动生成墙、楼板和屋顶.
  4. Launch 建筑结构计算.
  5. Using the 墙 components, draw the patio into the existing 房间 and launch 建筑结构计算 again.
  6. Over the patio area cut out an 屋顶开洞 and connect it using any two edges with the outer edge of the 屋顶.
  7. Optionally cut out an 楼板开洞 that covers the patio area.
  8. Run 建筑结构计算 again.

Using manually drawn walls

Information on creating a building structure using the 墙, 屋顶 and 楼板 components is provided in the article: Preparation of building structure - Complete building structure.


  1. Outline the shape of the room and patio using the 墙 components.
  2. Add 屋顶 and 楼板 components to the design.
  3. Launch 建筑结构计算.
  4. Over the patio area cut out an 屋顶开洞 and connect it using any two edges with the outer edge of the 屋顶.
  5. Optionally cut out an 楼板开洞 that covers the patio area.
  6. Run 建筑结构计算 again.

  • Attention! It is also possible to leave an empty space above the patio and draw a 屋顶 in the form of two perfectly abutting roof slopes.
    2. Roof slopes in a building with a patio.


取自“https://cn.help.instalsoft.com/index.php?title=如何绘制带天井的建筑&oldid=24413”