如何删除: "超过最大空气流速"警告信息
跳转到导航
跳转到搜索
| 产品 | InstalSystem 5 |
| 文章类型 | TIP&TRICK |
| 版本的最新内容 | 2025-01-10 |
Problem description
The problem may occur after the project calculation on the scope 通风系统计算 and is reported in the 诊断 window with the 警告 message:
- 超过最大空气流速（%s m/s>%s m/s）.
Solution
If a message about exceeding the vmax value in the ducts appears, the following steps can be taken to correct this issue:
- select the duct types with larger diameters as default, for a specific location, in the 一般参数/通风系统计算/默认类型和参数 window;
- select the larger diameter type for individual ducts in the 参数表 after first selecting the ducts (a two-click on the diagnostic message selects the problematic ducts);
- make the distribution with a greater number of ducts;
- insert additional air diffusers/extractors;
- increase the value in the 最大气流速度, V最大 box as default in the 一般参数/通风系统计算/默认类型和参数 window or in the 参数表 window for particular ducts.
1. 一般参数/通风系统计算/默认类型和参数. 
2. Ventilation duct - 参数表.
