如何删除: "对于卫生器具，标高差太大"
| 产品 | InstalSystem 5 |
| 文章类型 | 提示和技巧 |
| 版本的最新内容 | 2024-06-26 |
问题描述
该问题与生活排水系统计算 的设计有关，并显示以下诊断消息：
- 对于卫生器具(%s)，标高差太大（%s） 。
当卫生器具 的纵坐标与下一个水平（近水平）段的开始之间或（如果没有这样的段）支管的纵座标与最后一段的结束之间的高程降值大于标准EN 12056-2:2000中规定的“最大落差（H）”值时，将显示。
The 警告 is displayed when the value of the elevation drop between the ordinates of the 卫生器具 and the beginning of the next horizontal (near-horizontal) section of the branch or (if there is not such section) between the ordinates of the 卫生器具 and the end of the last section of the branch is bigger than the value of "Maximum drop (H)" specified in the Standard EN 12056-2:2000.
Note: According to the Standard for unventilated discharge branches the value of H should be less or equal 1m, for ventilated discharge branches - less or equal 3m.
Solution
This diagnostic message is not critical and has no influence on the further calculations of the installation. If you choose to remove it, this can be done in the following ways:
- Add local ventilation - 吸气阀:
- Reconfigure the geometry of the installation.