在供热和给水系统设计时创建和使用自定义的配件组模块

产品	InstalSystem 5
文章类型	FUNCTION AND TOOL
版本的最新内容	2024-07-25

说明

为了加快使用重复配件 如泵组、水表组件等开展系统设计的进程，程序提供了创建和保存包含所需配件 的模块.这样的模块可以在给定的项目或其他项目中多次使用，方法是将其插入到2D编辑器 或3D视图 中的选定管路上。

Location in the program

• The icon 创建带有配件的模块 is available in the 主工具 toolbar, section 编辑.
  

  

  1. Location in program.

  
  

Example of use

Module Creation

• Draw an unconnected single-section 管路 and place the required 配件 on it, observing the required distances. The position of the fittings closer to one end of the 管路 or the other will be memorised and used when working with the function.
  The 管路 of existing installation can also be used to create a module. However, it is important to remember the relationship between the valve types used in the project. Because when using in the created module valves defined according to the "auto" mode, the programme will automatically select their types by default depending on the location.
• Select the fittings you have added and use the Create module with fittings function, specifying the name, description and icon of the module.
  
  
  
• Add a ribbon with the created module using the 工具栏设置 function: 文件 / 设置 / 工具栏设置:
  • Create 新的选项卡 or use previously created one;
  • Create 新的工具栏 or use previously created one;
  • Use the function 将所选择的模块添加到选择的图库中 .
    

Module insertion

Insert single module

• Select an editor (2D编辑器 or 3D视图) and the appropriate editing scope;
• Select the required module on the appropriate tab and in the gallery;
• If necessary, select the 镜像 checkbox;
• Insert the module on the required 管路;
• In case of unsatisfactory positioning of the module, correct the positioning of all components of the module or its separate parts;
• Check connections and types of fittings and their orientation in relation to the flow direction.
  

Insert module multiple times

• Select an editor (2D编辑器 or 3D视图) and the appropriate editing scope.
• Choose the 管路 where the modules are to be positioned;
• Use the 插入到所有已选部件上 function. The position of the inserted module relative to the end/beginning of the 管路, on which it was created, will correspond to the position in the module definition;
• Correct the positioning of the module or its separate parts. Note: The location of the module can be easily changed using the pop-up menu of the 管路 (right mouse click);
• Check connections and types of fittings and their orientation in relation to the flow direction.
  

Additional information

Such types of fittings as 泵, 过滤器, 止回阀 are always automatically orientated in relation to the flow direction and this orientation should not be changed.