用管路作为水力分配系统进行辐射系统的设计：修订间差异

来自HelpSystem
跳转到导航 跳转到搜索
无编辑摘要
第30行： 第30行：
{{Project table
{{Project table
|initial_state1      = http://download.instalsoft.com/public/helpsystem//SUZ/SUZ-RH-BEZROZ-Design-of-radiant-heating-installation-in-Tichelmann-System-v5/InstalSoft-InstalSystem5-Tichelmann-Installation-System-initial.isproj
|initial_state1      = http://download.instalsoft.com/public/helpsystem//SUZ/SUZ-RH-BEZROZ-Design-of-radiant-heating-installation-in-Tichelmann-System-v5/InstalSoft-InstalSystem5-Tichelmann-Installation-System-initial.isproj
|initial_file_name1      = 初始状态的辐射供热同程管路系统
|initial_file_name1      = Initial state radiant heating Tichelmann system design
|is2                    = <!-- Jest plik -> "|initial_state2= <link do pliku na ftp>" / Brak pliku -> "|is2=" -->
|is2                    = <!-- Jest plik -> "|initial_state2= <link do pliku na ftp>" / Brak pliku -> "|is2=" -->
|initial_file_name2      = <!-- Jest plik -> "|initial_file_name2= <tytuł pliku>, <rozszerzenie>" / Brak pliku -> "|initial_file_name2=" -->
|initial_file_name2      = <!-- Jest plik -> "|initial_file_name2= <tytuł pliku>, <rozszerzenie>" / Brak pliku -> "|initial_file_name2=" -->


|final_state1            = https://pan.baidu.com/pcloud/album/file?album_id=1963731388963957163&uk=2190785863&fsid=548113515385349
|final_state1            = http://download.instalsoft.com/public/helpsystem/SUZ/SUZ-RH-BEZROZ-Design-of-radiant-heating-installation-in-Tichelmann-System-v5/InstalSoft-InstalSystem5-Tichelmann-Installation-System.isproj
|final_state_name1       = 同程管路辐射供热系统实例
|final_state_name1       = Example of Tichelmann radiant heating system
|fs2                    = <!-- Jest plik -> "|final_state2= <link do pliku na ftp>" / Brak pliku -> "|fs2=" -->
|fs2                    = <!-- Jest plik -> "|final_state2= <link do pliku na ftp>" / Brak pliku -> "|fs2=" -->
|final_state_name2       = <!-- Jest plik -> "|final_file_name2= <tytuł pliku>, <rozszerzenie>" / Brak pliku -> "|final_file_name2="-->
|final_state_name2       = <!-- Jest plik -> "|final_file_name2= <tytuł pliku>, <rozszerzenie>" / Brak pliku -> "|final_file_name2="-->


|commercial_product      = InstalSystem 5
|commercial_product      = InstalSystem 5
|rev                    = Beta 30
|rev                    = Beta 30


|module1=InstalSystem 基本模块
|module1=InstalSystem basis
|module2    =供热系统 5
|module2    =Heating system 5
|module3    =辐射回路系统 5
|module3    =Radiant loop systems 5
|m4    = <!-- Jest moduł -> "|module4= <nazwa modułu z W6936>" / Brak kolejnego modułu -> "|m4=" -->
|m4    = <!-- Jest moduł -> "|module4= <nazwa modułu z W6936>" / Brak kolejnego modułu -> "|m4=" -->


|range                = 辐射供热
|range                = Radiant heating


|catalogue1=普通辐射系统
|catalogue1=Basic radiant systems
|catalogue2=铜管、铸铁管和钢管管件
|catalogue2=Brass, cast iron and steel fittings
|catalogue3=PEX管和管件
|catalogue3=PEX pipes and fittings
|catalogue4=各种配件（任意制造商的其它配件）
|catalogue4=Miscellaneous fittings any manufacturer
|catalogue5=标准绝热材料目录
|catalogue5=Standard insulation
|c6        = <!-- Jest katalog -> "|catalogue7= <nazwa katalogu>" / Brak katalogu -> "|c6=" -->
|c6        = <!-- Jest katalog -> "|catalogue7= <nazwa katalogu>" / Brak katalogu -> "|c6=" -->
|c7        = <!-- Jest katalog -> "|catalogue7= <nazwa katalogu>" / Brak katalogu -> "|c7=" -->
|c7        = <!-- Jest katalog -> "|catalogue7= <nazwa katalogu>" / Brak katalogu -> "|c7=" -->
第60行： 第60行：
|c10      = <!-- Jest katalog -> "|catalogue10= <nazwa katalogu>" / Brak katalogu -> "|c10=" -->
|c10      = <!-- Jest katalog -> "|catalogue10= <nazwa katalogu>" / Brak katalogu -> "|c10=" -->


|type                = 公共娱乐和健身设施
|type                = public recreation and sports facility
|basement            = 无地下室
|basement            = no basement
|number_of_stor
|number_of_storeys    = 1-storey
 
|building_structure1  =http://download.instalsoft.com/public/helpsystem/SUZ/SUZ-RH-BEZROZ-Design-of-radiant-heating-installation-in-Tichelmann-System-v5/Tennis-courts-base.dwg
|file_name1          = Tennis courts, dwg
|bs2                  = <!-- Jest plik -> "building_structure2= <link do pliku na ftp>" / Brak pliku -> "|bs2=" -->
|file_name2          = <!-- Jest plik -> "|file_name2= <tytuł rysunku, rozszerzenie>" / Brak pliku -> "|file_name2=" -->
|bs3                  = <!-- Jest plik -> "building_structure3= <link do pliku na ftp>" / Brak pliku -> "|bs3=" -->
|file_name3          = <!-- Jest plik -> "|file_name3= <tytuł rysunku, rozszerzenie>" / Brak pliku -> "|file_name3=" -->
|bs4                  = <!-- Jest plik -> "building_structure4= <link do pliku na ftp>" / Brak pliku -> "|bs4=" -->
|file_name4          = <!-- Jest plik -> "|file_name4= <tytuł rysunku, rozszerzenie>" / Brak pliku -> "|file_name4=" -->
 
|drawings_range      = Plan drawing
 
|logo                =File:Logo-KMR.png
|www                  =http://kmr-pe.pl www.kmr-pe.pl
 
|legal_disclaimer    =Copy all or fragments allowed
 
|calculation_results1 =http://download.instalsoft.com/public/helpsystem/SUZ/SUZ-RH-BEZROZ-Design-of-radiant-heating-installation-in-Tichelmann-System-v5/Tichelmann-Installation-System-full-printouts.xlsx
|results_title1      =Complete range of calculation results, xls
|calculation_results2                  =http://download.instalsoft.com/public/helpsystem/SUZ/SUZ-RH-BEZROZ-Design-of-radiant-heating-installation-in-Tichelmann-System-v5/Tichelmann-Installation-System-full-printouts.pdf
|results_title2      =Complete range of available printouts, pdf
|calculation_results3                  =http://download.instalsoft.com/public/helpsystem/SUZ/SUZ-RH-BEZROZ-Design-of-radiant-heating-installation-in-Tichelmann-System-v5/Tichelmann-Installation-System-general-heating-results.pdf
|results_title3      =Radiant heating calculation results, pdf
|calculation_results4                  =http://download.instalsoft.com/public/helpsystem/SUZ/SUZ-RH-BEZROZ-Design-of-radiant-heating-installation-in-Tichelmann-System-v5/Tichelmann-Installation-System-bill-components.pdf
|results_title4      =Bill of materials, pdf
|calculation_results5                  =http://download.instalsoft.com/public/helpsystem/SUZ/SUZ-RH-BEZROZ-Design-of-radiant-heating-installation-in-Tichelmann-System-v5/Tichelmann-Installation-System-installation-parameters.pdf
|results_title5      =Installation parameters, pdf
 
|drawing_result1      =http://download.instalsoft.com/public/helpsystem/SUZ/SUZ-RH-BEZROZ-Design-of-radiant-heating-installation-in-Tichelmann-System-v5/Tichelmann-Installation-System-Tennis-courts-base-export.dwg
|drawing_title1      = Tennis courts, dwg
|drawing_result2                  =http://download.instalsoft.com/public/helpsystem/SUZ/SUZ-RH-BEZROZ-Design-of-radiant-heating-installation-in-Tichelmann-System-v5/Tichelmann-Installation-System-Tennis-courts-base-print
|drawing_title2      = Tennis courts, pdf
|dr3                  = <!-- Jest plik -> "|drawing_result3= <Link do pliku na ftp>" / Brak pliku -> "|dr3=" -->
|drawing_title3      = <!-- Jest plik -> "|drawing_title3= <tytuł rysunku, rozszerzenie>" / Brak pliku -> "|drawing_title3=" -->
|dr4                  = <!-- Jest plik -> "|drawing_result4= <Link do pliku na ftp>" / Brak pliku -> "|dr4=" -->
|drawing_title4      = <!-- Jest plik -> "|drawing_title4= <tytuł rysunku, rozszerzenie>" / Brak pliku -> "|drawing_title4=" -->
|dr5                  = <!-- Jest plik -> "|drawing_result5= <Link do pliku na ftp>" / Brak pliku -> "|dr5=" -->
|drawing_title5      = <!-- Jest plik -> "|drawing_title5= <tytuł rysunku, rozszerzenie>" / Brak pliku -> "|drawing_title4=" -->
|dr6                  = <!-- Jest plik -> "|drawing_result6= <Link do pliku na ftp>" / Brak pliku -> "|dr6=" -->
|drawing_title6      = <!-- Jest plik -> "|drawing_title6= <tytuł rysunku, rozszerzenie>" / Brak pliku -> "|drawing_title4=" -->
}}
# Launch '''InstalSystem 5'''.
# Open new project and select preferred file version.<br/>{{Info}} [[Project and application management]]
# Select appropriate template.<br/>{{Info}} [[Software_configuration#Template_files|Template files]]
 
===Load cataloues and set default data for the project===
# Load catalogues required for the project.
# Specify the following in section ''<IS_TS id=btDaneBudynku/>/<IS_TS id=DanePomieszczen/>'':
#* ''<IS_TS id=strs_enumidISFPomieszczenieEN12831_TypUzytkowyPomieszczenia/>'',
#* ''<IS_TS id=LblDefTiCaptionHeat/>'',
#* ''<IS_TS id=strLblWskaznikQPowCaptionHeat/>'',
# In section ''<IS_TS id=InstalacjeCieplne/>''/''<IS_TS id=InstalacjaRozprowadzajaca/>''/''<IS_TS id=strGbxWirtualnePolaczeniaCaption/>'' select: '''''<IS_TS id=allowCalcWithoutManifold/>'''''.<br/>[[File:InstalSoft-InstalSystem5-Installation-with-no-manifolds.png|900 px|left|thumb|1. ''<IS_TS id=rsDanogi/>'']]<br clear="all"/>
# In section ''<IS_TS id=InstalacjeCieplne/>''/''<IS_TS id=InstalacjaRozprowadzajaca/>''/''<IS_TS id=DaneInstalacjiRozprowadzajacejCzynnikGrzewczyChlodniczy/>'' specify:
#* ''<IS_TS id=DomyslneTypyRur/>'' i ''<IS_TS id=strLblDomyslnyTypIzolacjiCaption/>''.
# In section ''<IS_TS id=InstalacjeCieplne/>''/''<IS_TS id=SystemyPlaszczyznowe/>''/''<IS_TS id=DaneInstalacjiPodlogowych/>'' select:
#* ''<IS_TS id=strDomyslnySystemSposobMocowania/>'',
#* ''<IS_TS id=strDomyslnyTypRur/>'',
#* ''<IS_TS id=strWariantUlozenia/>'' (''<IS_TS id=strPojedynczyMeander/>''),
#* ''<IS_TS id=strLblMaxDPCaption/>'',
#* ''<IS_TS id=strWylewka/>'',
#* ''<IS_TS id=strDomyslnaOkladzina/>'',
#* Maximum permissible floor surface temperature
# In section ''<IS_TS id=InstalacjeCieplne/>''/''<IS_TS id=SystemyPlaszczyznowe/>''/''<IS_TS id=ZestawyElementowZwojeMaxDlPetli/>'' specify:
#* Max. pipe length in loop.
{{Info}} [[Introduction to the work with the package InstalSystem 5#General data|General data]]
 
===Prepare building structure===
{{Info}} [[Design of radiant heating floor and wall installation#Prepare building structure|Prepare building structure]]
 
===Edit installation - radiant system===
# Insert ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' components in the rooms.
# Specify orientation of ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' division along its short side.
# Divide ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' components in vertical/horizontal plane with regard to required expansion allowances.
{{Info}} [[Design of radiant heating floor and wall installation#Heating.2FCooling Zone|Heating/Cooling Zone]]
 
===Edit system components data - radiant system===
# Specify ''<IS_TS id=SPG_PartitionCriteriaCaption/>'': ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'': ''<IS_TS id=strStrataCisnieniaWPetliLong/>''.
# Specify appropriate supply temperature in ''<IS_TS id=SettingsObwodyRegulacji/>''.<br/>[[File:Hs-suz-bezreg-control-circuit-ribbon.png|900 px|left|thumb|2. Control circuit data]]<br clear="all"/>
 
===Radiant system calculations===
# Perform radiant system calculations to divide ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' into: ''<IS_TS id=PowGrzewczoChlodzaca/>'' according to set ''<IS_TS id=SPG_PartitionCriteriaCaption/>''.
{{Info}} [[Introduction_to_the_work_with_the_package_InstalSystem_5#Calculations_and_diagnostics|Calculations and diagnostics]]
 
===Edit installation - connecting ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' components in Tichelmann system===
# Fetch''<IS_TS id=iNameCOZrodlo/>'' from the toolbar.
# Connect ''<IS_TS id=iNameCOZrodlo/>'', ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' components in a Tichelmann system using: ''<IS_TS id=iNameDzialka/>'' components in the ''<IS_TS id=strAUTOModeName/>'' and ''<IS_TS id=strORTOModeName/>'' modes and the ''<IS_TS id=btCheckFlow/>'' function.<br/>{{#ev:youtube|_QvZCN0EQzk|900||||rel=0}}
 
===Edit system component data - distribution===
# Specify\verify diameters of feed pipes included in: ''<IS_TS id=PowGrzewczoChlodzaca/>'' components.
 
===Verify the correctness of installation structure===
{{Info}} [[Introduction_to_the_work_with_the_package_InstalSystem_5#Verification_of_the_correctness_of_installation_structure|Verification of the correctness of installation structure]]
 
===Calculations and diagnostics===
# Run project calculations.
# Verify calculation results. Pay special attention to:
#* coverage of heat demand in rooms,
#* messages about flow unbalance in circuits.
{{Info}} [[Introduction_to_the_work_with_the_package_InstalSystem_5#Calculations_and_diagnostics|Calculations and diagnostics]]
 
===Prepare drawing for printing/export===
{{Info}} [[Design_of_radiant_heating_floor_and_wall_installation#Prepare_drawing_for_printing.2Fexport|Prepare drawing for printing/export]]
 
[[pl:projektowanie systemów płaszczyznowych z rozdziałem czynnika działkami]]
[[en:Designing radiant heating systems with pipe-runs as distribution system]]
<!--Lista kategorii produktów handlowych, których artykuł dotyczy-->
[[Category:InstalSystem 5]]
[[Category:软件应用]]

2017年3月4日 (六) 14:48的版本

产品 InstalSystem 5
文章类型 软件应用
版本的最新内容 IS 5.0 Beta 2.0.B1


课程的内容

本文介绍了不用分集水器，而是利用同程管路系统来连接"供热/供冷"面进行辐射供暖/供冷系统的设计方法。如果需要对每个"供热/供冷"面进行平衡调节，则可在管道上放置阀门来进行传统的流量调节。
本软件也可进行传统的双管并联设计，通过指定较大口径的"主管"来减小管路的压差。

模块和程序的配置

InstalSystem 5 包括下面的模块：

  • 盘管辐射供热系统。

初始状态

建筑结构（楼层、房间）已定义，房间的省缺参数、水力分配系统和地面系统也已定义。可从项目案例表中下载初始的和最终的设计文件。

操作步骤

打开一新的项目文件

在INSTALSYSTEM中的项目案例
项目文件

如何计算下载的文件?

Initial state radiant heating Tichelmann system design
Example of Tichelmann radiant heating system
设计时使用 InstalSystem 5 Rev. Beta 30
所需模块 InstalSystem basis
Heating system 5
Radiant loop systems 5
项目范围 Radiant heating
所用的产品目录

Basic radiant systems
Brass, cast iron and steel fittings
PEX pipes and fittings
Miscellaneous fittings any manufacturer
Standard insulation

建筑类型 public recreation and sports facility
no basement
1-storey
建筑结构 Tennis courts, dwg
图纸范围 Plan drawing
设计者
www.kmr-pe.pl
法律免责声明 Copy all or fragments allowed
计算结果 Complete range of calculation results, xls
Complete range of available printouts, pdf
Radiant heating calculation results, pdf
Bill of materials, pdf
Installation parameters, pdf
设计图纸 Tennis courts, dwg
Tennis courts, pdf


  1. Launch InstalSystem 5.
  2. Open new project and select preferred file version.
    更多信息，见： Project and application management
  3. Select appropriate template.
    更多信息，见： Template files

Load cataloues and set default data for the project

  1. Load catalogues required for the project.
  2. Specify the following in section 建筑和环境/房间参数:
    • 房间类型,
    • 默认的室内设计温度 θ室内,供热,
    • 热负荷Φ表面,供热,
  3. In section 供热/供冷系统计算/水力分配系统/假想的辐射系统连接 select: 允许系统无分集水器.
    1. 一般参数

  4. In section 供热/供冷系统计算/水力分配系统/默认类型和参数 specify:
    • 默认的管材类型 i 管材绝热类型.
  5. In section 供热/供冷系统计算/辐射系统/地面系统 select:
    • 默认的系统/固定方式,
    • 默认的管材类型,
    • 铺管方式 (单管蛇形),
    • 回路最大压降,
    • 回填层,
    • 默认的表面装饰层,
    • Maximum permissible floor surface temperature
  6. In section 供热/供冷系统计算/辐射系统/盘卷 specify:
    • Max. pipe length in loop.

更多信息，见： General data

Prepare building structure

更多信息，见： Prepare building structure

Edit installation - radiant system

  1. Insert 供热/供冷区 components in the rooms.
  2. Specify orientation of 供热/供冷区 division along its short side.
  3. Divide 供热/供冷区 components in vertical/horizontal plane with regard to required expansion allowances.

更多信息，见： Heating/Cooling Zone

Edit system components data - radiant system

  1. Specify 分割标准: 供热/供冷区: 回路压降.
  2. Specify appropriate supply temperature in .
    2. Control circuit data

Radiant system calculations

  1. Perform radiant system calculations to divide 供热/供冷区 into: 供热/供冷面 according to set 分割标准.

更多信息，见： Calculations and diagnostics

Edit installation - connecting 供热/供冷区 components in Tichelmann system

  1. Fetch源 from the toolbar.
  2. Connect 源, 供热/供冷区 components in a Tichelmann system using: 管路 components in the 捕捉 and 定向线 modes and the 检查连接 function.

Edit system component data - distribution

  1. Specify\verify diameters of feed pipes included in: 供热/供冷面 components.

Verify the correctness of installation structure

更多信息，见： Verification of the correctness of installation structure

Calculations and diagnostics

  1. Run project calculations.
  2. Verify calculation results. Pay special attention to:
    • coverage of heat demand in rooms,
    • messages about flow unbalance in circuits.

更多信息，见： Calculations and diagnostics

Prepare drawing for printing/export

更多信息，见： Prepare drawing for printing/export

取自“https://cn.help.instalsoft.com/index.php?title=用管路作为水力分配系统进行辐射系统的设计&oldid=2295”